Panasonic SH-FX71 작동 가이드

11

RQTX

11

3

1

Set the unit up on an even surface away from direct sunlight, high 

temperatures, high humidity, and excessive vibration. These 

conditions can damage the cabinet and other components, 

thereby shortening the unit’s service life. 

Do not place heavy items on the unit.

Do not use high voltage power sources. This can overload the 

unit and cause a fire. 

Do not use a DC power source. Check the source carefully when 

setting the unit up on a ship or other places where DC is used.

Ensure the AC mains lead is connected correctly and not 

damaged. Poor connection and lead damage can cause fire or 

electric shock. Do not pull, bend, or place heavy items on the lead.

Grasp the plug firmly when unplugging the lead. Pulling the AC 

mains lead can cause electric shock. 

Do not handle the plug with wet hands. This can cause electric shock.

Do not let metal objects fall inside the unit. This can cause electric 

shock or malfunction.

Do not let liquids get into the unit. This can cause electric shock 

or malfunction. If this occurs, immediately disconnect the unit 

from the power supply and contact your dealer.

Do not spray insecticides onto or into the unit. They contain 

flammable gases which can ignite if sprayed into the unit.

Do not attempt to repair this unit by yourself. If sound is interrupted, 

indicators fail to light, smoke appears, or any other problem that is 

not covered in these instructions occurs, disconnect the AC mains 

lead and contact your dealer or an authorized service center. 

Electric shock or damage to the unit can occur if the unit is 

repaired, disassembled or reconstructed by unqualified persons.

Extend operating life by disconnecting the unit from the power 

source if it is not to be used for a long time.

Before requesting service, make the following checks. If you are 

in doubt about some of the check points, or if the solutions 

indicated in the table do not solve the problem, consult your 

dealer for instructions.

No power.
Ensure the AC mains lead is connected properly.

The indicator does not turn green even though [I/D SET] is 
pressed and completed the pairing.
Turn the wireless system off and then back on.

No sound from the left or right surround speaker.
≥Refer to page 8 for the surround selector setting details and 

ensure that the selector is set at the correct position. Then, 

turn the wireless system off and then back on.

≥Verify the surround sound setting on the home theater unit.
The wireless link indicator keeps flashing between red and
green.
There is a power supply problem. Consult the dealer.

The wireless link indicator 
(e.g. “ [W] ” or an indicator) is flashing.

There is no link between the home theater unit and the wireless 

system. Turn the wireless system off and then back on. 

Alternatively, turn the wireless system off, disconnect the AC 

mains lead, and then reconnect it.

The wireless link indicator 
(e.g. “ [W] ” or an indicator) does not light.
≥Check that the home theater unit is turned on, and the wireless 

system is turned on.

≥Ensure that the digital transmitter is fully inserted into the slot 

of the home theater unit.

SH-FX71_RQTX1131-B_En.book  Page 11  Thursday, January 14, 2010  5:18 PM