Panasonic KXMC6020HX 작동 가이드
11. Help
85
11.2 Error messages – Display
If the unit detects a problem, one or more of the following messages will appear on the display.
Display
Cause & Solution
“
BLACK TONER EMPTY”
“
CYAN TONER EMPTY”
“
MAGENTA TONER EMPTY”
“
YELLOW TONER EMPTY”
b
“
CHANGE SUPPLIES”
L
The toner cartridge life is finished. Replace the toner cartridge immediately.
“
BLACK TONER LOW”
“
CYAN TONER LOW”
“
MAGENTA TONER LOW”
“
YELLOW TONER LOW”
b
“
CHANGE SUPPLIES”
L
The toner cartridge life is near its end. Replace the toner cartridge as soon
as possible.
as possible.
“
CALL SERVICE”
L
There is something wrong with the unit. Contact our service personnel.
“
CHECK DOCUMENT”
L
The document was not fed into the unit properly. Remove the document,
then press {Stop} to clear the message. Re-insert the document. If
misfeeding occurs frequently, clean the document feeder rollers (page 104)
and try again.
then press {Stop} to clear the message. Re-insert the document. If
misfeeding occurs frequently, clean the document feeder rollers (page 104)
and try again.
“
CHECK INSTALL INPUT
TRAY #1”
L
The paper input tray is not installed correctly. Pull out the paper input tray
and re-insert it.
and re-insert it.
Note:
L
“
#1”: Standard input tray
L
“
#2”: Optional input tray
L
“
#1+#2”: Standard input tray and optional input tray
“
CHECK PAPER”
L
You are printing on envelopes. Check the standard input tray to be sure that
envelopes are installed, then press {Black}/{Colour}.
envelopes are installed, then press {Black}/{Colour}.
L
The recording paper size is not the same as the size selected for copy.
Change the recording paper size setting (feature #380 on page 62 or
feature #382 on page 62), and install the appropriate recording paper.
Change the recording paper size setting (feature #380 on page 62 or
feature #382 on page 62), and install the appropriate recording paper.
L
The recording paper size is not the same as the size selected when printing
from the PC. Change the recording paper size setting (feature #380 on page
62 or feature #382 on page 62), and install the appropriate recording paper.
from the PC. Change the recording paper size setting (feature #380 on page
62 or feature #382 on page 62), and install the appropriate recording paper.
L
The recording paper size is not the same as the size selected for receiving
a fax. Change the recording paper size setting (feature #380 on page 62 or
feature #382 on page 62), and install the appropriate recording paper.
a fax. Change the recording paper size setting (feature #380 on page 62 or
feature #382 on page 62), and install the appropriate recording paper.
“
CHECK PICK UP INPUT
TRAY #1”
L
Recording paper was not fed into the unit properly. Re-insert the recording
paper (page 101).
paper (page 101).
Note:
L
“
#1”: Standard input tray
L
“
#2”: Optional input tray
“
COLOUR DRUM REPLACE”
“
MONOCHROME DRUM
REPLACE”
b
“
CHANGE SUPPLIES”
L
The drum cartridge life is finished. Replace the drum cartridge immediately.
Note:
L
The continuous use of an old drum cartridge may cause malfunction. To
prevent this, when the drum life is finished, the unit will stop printing after a
while, and printing will not be possible until a new drum cartridge is
installed.
prevent this, when the drum life is finished, the unit will stop printing after a
while, and printing will not be possible until a new drum cartridge is
installed.