Panasonic ESST3N 작동 가이드

19

Perform the following actions.
If the problems still cannot be solved, contact the store 
where you purchased the unit or a service centre authorized 
by Panasonic for repair.

The power switch does 
not turn ON.

Unlock the switch lock. 
(See page 16.)

The shaving sensor 
does not respond.

Depending on the beard 
thickness or the amount of 
beard trimmings in the shaver 
head, the shaving sensor may 
not react and the driving sound 
may not change. This is not 
abnormal.
The shaving sensor may not 
respond depending on the type 
and quantity of the shaving gel. 
This is not abnormal.
The shaving sensor may not 
respond when the remaining 
battery capacity is low. If this 
happens, recharge the shaver.
Apply oil. 
(See page 17.)
The shaving sensor may not 
respond when there is not 
enough oil on the blades.

The shaving sensor 
responds even though 
the shaver is not in 
contact with the skin.

Clean the beard trimmings from 
the shaver.
When the shaver is extremely 
dirty, remove the foil frame and 
wash with water.
(See page 16.)
Replace the system outer foil 
and/or inner blades.
Expected life of system outer 
foil and inner blades:
System outer foil:

Approximately 1 year

Inner blades:

Approximately 2 years

The shaver cannot be 
charged.

The recommended temperature 
for charging is 10 °C – 35 °C. If 
charged at a temperature other 
than the recommended 
temperature, the shaver may 
take longer to charge or may 
not charge at all.

Operating time is short 
even after charging.

Apply oil.
When the number of operations 
per charge starts to decrease, 
the battery is nearing the end of 
its life.