Panasonic KXTG6521FX 작동 가이드

51

If you still have difficulties after following the instructions in this section, disconnect 
the base unit’s AC adaptor and turn off the handset, then reconnect the base unit’s 
AC adaptor and turn on the handset.

The handset does not turn on 
even after installing charged 
batteries.

L

Place the handset on the base unit or charger 
to turn on the handset.

The unit does not work.

L

Make sure the batteries are installed correctly 
(page 11).

L

Fully charge the batteries (page 11).

L

Check the connections (page 11).

L

Unplug the base unit’s AC adaptor to reset the 
unit and turn off the handset. Reconnect the 
adaptor, turn on the handset and try again.

L

The handset has not been registered to the 
base unit. Register the handset (page 31).

I cannot hear a dial tone.

L

Make sure that you are using the supplied 
telephone line cord. Your old telephone line 
cord may have a different wiring configuration.

L

The base unit’s AC adaptor or telephone line 
cord is not connected. Check the connections.

L

Disconnect the base unit from the telephone 
line and connect the line to a known working 
telephone. If the working telephone operates 
properly, contact our service personnel to 
have the unit repaired. If the working 
telephone does not operate properly, contact 
your service provider/telephone company.

The display is in a language I 
cannot read.

L

Change the display language (page 16).

While programming, the 
display returns to standby 
mode.

L

A call matching an entry in the call barred list 
is being received.

 Wait and try again later.

TG6511-6521FX(e).book  Page 51  Wednesday, February 24, 2010  1:41 PM