Panasonic ERGK60 작동 가이드

14

3. Wipe off the water with a towel and 

let it dry naturally.

• It will dry faster with the blade 

removed.

4. Apply the oil to the blade after 

drying. (See this page.)

5. Attach the blade and attachment to the main body.

►

• Remove the blade. (See this page.)
1. Brush off any hair trimmings from the 

main body and from around the blade.

2. Brush off the hairs from the blade edge.

3. Brush any hair trimmings out from 

between the stationary blade and the 

moving blade while pressing down the 

cleaning lever (a) to raise the moving 

blade.



4. Apply the oil to the blade. (See this page.)

5. Attach the blade and attachment to the main body.
AC adaptor

Use the cleaning brush to clean hair trimmings and dust in the 

charging plug or in the hole on the bottom surface.

• Apply the oil to the blade before and after each use.

►

Replacement part is available at your dealer or Service Centre.

Replacement parts for ER‑GK60 Blade

WER9500

Hold the trimmer and push the blade 

with your thumb.

Fit the mounting hook (B) into the blade mounting (A) on the 

trimmer and then push in until you hear a click.





ER-GK60_EU.indb   14

2017/04/13   9:18:24