Panasonic KYT937XLEPG 작동 가이드

EN-

14

EN-

15

For smaller pans, place the cookware in one of the 

four positions shown.

For larger pans, place the cookware in one of the three 

positions shown.

 

Place it at the top or bottom edge of the fl ex cooking 

zone.

The front and rear areas of a fl ex cooking zone can 

be used independently of each other by selecting the 

necessary power for each one.

Do not place the cookware over multiple fl ex cooking 

zones. 

Do not place the cookware in an off-centre position. 

The sensor may not function properly and could cause 

a fi re.

Flex Cooking Zone

The fl ex cooking zone consists of several independently-controlled inductors. When 

cookware is detected, only sections that are in contact with the cookware will be 

activated, all others will remain switched off.
To ensure that the cookware is detected and heat is distributed evenly, centre the 

cookware as shown below:

 Material

Shape of the Base

If there is liquid between them, it can cause steam pressure and 

the pan may move.

cookware to scorch during cooking. Enamel coating may melt 

and damage the top plate.

 

- - -

- - -

the display. (See page 39)

  The base needs to be fl at and sit evenly on the top plate. 

(Failure to ensure this could result in injuries or burns.)
 

 

■  Iron / Cast iron

 

■ Enamelled iron

 

■ Magnetic stainless steel

( The heating power may not be as strong for some stainless steel cookware.)

 

■  Aluminium / Copper

 

■  Heat-resistant  glass

 

■  Ceramic and earthenware

Do not use curved-based cookware with a 3 mm 

or over curve, as the safety features may not be 

activated, heating power may be diminished, or the 

cookware may not be heated.

Round-based  With feet

Thin-based  Curved-based 

 

■  Round-based cookware

 

■ Cookware with feet

 

■  Thin-based cookware

 

■  Curved-based cookware