Panasonic SC-PT70 작동 가이드

다운로드
페이지 26
24
RQ
TX10
19
Getting S
tarted
Playing
 Discs
Ot
her Op
era
tions
Reference
The picture on the TV is not displayed correctly or 
disappears.
≥The unit and TV are using different video systems. Use 
a multi-system or PAL TV.
≥The system used on the disc does not match your TV.
–PAL discs cannot be correctly viewed on an NTSC TV.
–This unit can convert NTSC signals to PAL 60 for 
viewing on a PAL TV (“NTSC DISC OUT” in VIDEO 
menu). (B 18)
≥Ensure that the unit is connected directly to the TV, and 
is not connected through a VCR. (B 8)
≥Mobile telephone chargers can cause some 
disturbance.
≥If you are using an indoor TV antenna, change to an 
outdoor antenna.
≥The TV antenna wire is too close to the unit. Move it 
away from the unit.
≥Change “SOURCE SELECT” in Menu 2. [DivX] (B 15)
≥Pictures may not be seen when more than 4 devices 
are connected with HDMI cables. Reduce the number 
of connected devices.
≥When using the HDMI AV OUT terminal, ensure that an 
incompatible video output with the connected TV is not 
selected. Press and hold [CANCEL]F until the picture 
is displayed correctly. (The output will return to “480p” 
or “576p”.) (B 16)
≥Video images converted to 1920k1080 resolution may 
look different from the true native 1080p full-HD 
sources. This is not a malfunction of this unit.
≥When the HDMI cable is connected, there will be no 
RGB output from the SCART (AV) terminal. If the 
SCART (AV) terminal is to be used, remove the HDMI 
cable and turn this unit on/off again.
Picture stops. 
[DivX]
Picture may stop if the DivX files are greater than 2 GB.
Picture size does not fit the screen.
≥Change “TV ASPECT” in the VIDEO menu. (B 18)
≥Use the TV to change the aspect.
≥Change the zoom setting. (“ZOOM” in Menu 2) (B 15)
Menu is not displayed correctly.
Restore the zoom ratio to “NORMAL”. (“ZOOM” in Menu 2) 
(B 15)
Auto zoom function does not work well.
≥Turn off TV’s zoom function.
≥Zoom function may not work well, especially in dark 
scenes and may not work depending on the type of 
disc.
When playing PAL disc, picture distorted.
Set “TRANSFER MODE” in Menu 2 to “AUTO”. (B 15)
After choosing “Home Cinema” in “Speaker control” 
with the TV’s remote control, the TV’s input selection 
also changes.
Disconnect the HDMI cable from the TV and reconnect it 
to a different HDMI terminal.
There is ghosting when HDMI or progressive output 
is on.
This problem is caused by the editing method or material 
used on DVD-Video, but should be corrected if you use 
interlaced output. When using the HDMI AV OUT 
terminal, set “VIDEO FORMAT” in Menu 4 to “480i” or 
“576i”. Or, disable the HDMI AV OUT connection and use 
other video connections. (B 8, 16)
Distorted sound or noise is heard.
≥Adjust the position of the FM antenna.
≥Use an outdoor antenna. (B 8)
A beat sound is heard.
Turn the TV off or move it away from the unit.
/
The operation is prohibited by the unit or disc.
“THIS DISC CANNOT BE PLAYED IN YOUR REGION.”
Only DVD-Video discs that include or have the same 
region number as the one on the rear panel of this unit 
can be played. (B Cover page)
AUTHORIZATION ERROR” [DivX]
You are trying to play the DivX VOD content that was 
purchased with a different registration code. You cannot 
play the content on this unit. (B 20)
RENTAL EXPIRED” [DivX]
The DivX VOD content has zero remaining plays. You 
cannot play it. (B 20)
Maintenance
≥Never use alcohol, paint thinner or benzine to clean this 
unit.
≥Before using chemically treated cloth, carefully read the 
instructions that came with the cloth.
Do not use commercially available lens cleaners as 
they may cause malfunction.
 Cleaning of the lens is 
generally not necessary although this depends on the 
operating environment.
Picture
HDMI or progressive video
Radio
TV displays
Clean this unit with a soft, dry cloth
Before moving the unit, ensure the disc tray is 
empty.
 Failure to do so will risk severely damaging 
the disc and the unit.
SC-PT70EB-RQTX1019-B_eng.book  Page 24  Thursday, August 13, 2009  5:07 PM