Manualsbrain.com
  1. 매뉴얼
  2. 브랜드
  3. Panasonic
  4. SCPM533
  5. 작동 가이드

Panasonic SCPM533 작동 가이드

다운로드
페이지 중 24
RQTV0097
8
Discs (continued)
Checking which discs are in the trays (CD CHECK)
Checking which discs are in the trays (CD CHECK)
CD
 
MP3
 
WMA
1
Press [CD CHECK].
2
3
4
5
1
CD CHECK
2
Press the button again to close the trays.
Note
•  The tray with a disc being played will not open.
•  If the player is stopped, all trays will open.
•  Do not remove or insert discs during disc check.
•  Do not pull out the trays during disc check.
•  8 cm discs cannot be checked.
Display function
Display function
This function allows you to display the information of the 
current track.
Press [DISPLAY] repeatedly during play or pause mode.
CD
Elapsed time
   
Remaining time 
MP3
 
WMA
 Elapsed
 
time  
Remaining  
time
   
Album name
   
Track name 
Tag (Artist)
   
Tag (Track)   Tag (Album) 
Note
•  Maximum number of displayable characters: approximately 30
• This unit supports ver. 1.0 & 1.1 ID3 tags. Text data that is not 
supported will not be displayed.
•  ID3 is a tag embedded in MP3 tracks to provide information about 
the track.
Advanced play
Advanced play
Direct access play
Direct access play
This function allows you to start play from a specifi c track.
CD
Press the numeric buttons to select and play your 
desired track.
MP3
 
WMA
1
Press [ALBUM 
 or 
] to select the album.
2
Press 
[
3/FF/
¢
] once and then the numeric buttons 
to select and play your desired track.
For two-digit track, press [
h10] once, and then the two 
digits.
For three-digit track, press [
h10] twice, and then the three 
digits.
Note
This function does not work during any random/program mode.
Repeat play
Repeat play
You can repeat program play or other selected play mode.
CD
 
MP3
 
WMA
Press [REPEAT] before or during play.
“REPEAT ON” and “   ”  are  displayed.
To cancel
Press [REPEAT] again.
“REPEAT OFF” is displayed and “   ” is cleared.
Program play
Program play
This function allows you to program up to 24 tracks.
CD
1
Press [CD 
6] and then [STOP 
7
].
2
Press [PROGRAM].
3
Press [DISC].
4
(Within 10 seconds or so)
Press [1~5] to select your desired disc.
5
Press the numeric buttons to select your desired 
track.
6
Repeat steps 3 to 5 to program other tracks.
7
Press [CD 
6] to start play.
MP3
 
WMA
1
Press [CD 
6] and then [STOP 
7
].
2
Press [DISC].
3
(Within 10 seconds or so)
Press [1~5] to select your desired disc.
4
Press [STOP 
7
].
5
Press [PROGRAM].
6
Press [ALBUM 
 or 
] to select your desired 
album.
7
Press 
[
3/FF/
¢
] once and then the numeric buttons 
to select your desired track.
8
Press [ENTER].
Repeat steps 6 to 8 to program other tracks.
9
Press [CD 
6] to start play.
To
Action
cancel program mode Press [PROGRAM] in the stop mode. 
replay the program
Press [PROGRAM] then [CD 
6].
check program 
contents
Press [ /REW/
4] or [ /FF/¢] when 
“PGM” is displayed in the stop mode.
To check while programming, press 
[PROGRAM] twice after “PGM” appears, 
then press [ /REW/
4] or [ /FF/¢] .
add to the program
CD
Repeat step 3 to 5 in the stop mode.
MP3
 
WMA
Repeat steps 6 to 8 in the stop mode.
clear the last track
Press [DEL] in the stop mode.
clear all programmed 
tracks
Press [CLEAR] in the stop mode. “CLR ALL” 
is displayed. 
Note
• When you try to program more than 24 tracks “PGM FULL” 
appears.
•  During program play, skipping is always in the programmed order, 
whether forward or backward.
•  You cannot program CD-DA together with MP3 and WMA tracks.
•  You cannot change or open other trays during program play mode.
• 
CD
During program play, you can search backward or forward only 
within the current track.
• 
MP3
 
WMA
The program memory is cleared when you change a disc or open 
a disc tray.
RQTV0097_2P_EN.indd   8
RQTV0097_2P_EN.indd   8
2/6/06   3:34:43 PM
2/6/06   3:34:43 PM