Panasonic SC-PM53 작동 가이드

다운로드
페이지 16
RQTV0102
5
English
English
Optional antenna connections
Optional antenna connections
FM outdoor antenna 
AM outdoor antenna
FM outdoor antenna 
(not included)
75 Ω 
coaxial cable 
(not included)
FM ANT
75
AM ANT
EXT LOOP
(Only for the U.K.)
Use the antenna 
plug adaptor 
(included).
 
FM ANT
75
AM ANT
EXT LOOP
AM outdoor antenna 
 (not included)
AM loop antenna 
 (included)
•  Never use an outdoor antenna during a lightning storm. 
•  You can connect the FM outdoor antenna for better reception. Please consult your dealer for installation.
•  Disconnect the FM indoor antenna if an FM outdoor antenna is installed.
•  Connect the AM outdoor antenna without removing the AM loop antenna. Run 5 to 12 m of vinyl-covered wire horizontally 
along a window or other convenient location.
Step 2
 - Inserting batteries into the remote control
 - Inserting batteries into the remote control
AA/R6/LR6
 Batteries
•  Insert so the poles (+ and –) match those in the remote control.
•  Remove if the remote control is not going to be used for a long period of 
time. Store in a cool, dark place.
•  Do not use rechargeable type batteries.
•  Mishandling of batteries in the remote control can cause electrolyte 
leakage, which may cause a fi re.
Do not:
•  mix old and new batteries.
•  use different types of batteries at the same time.
•  heat or expose to fl ame.
•  take apart or short circuit.
•  attempt to recharge alkaline or manganese batteries.
•  use batteries if their covering has been peeled off.
 Use
•  Aim at the remote control sensor, avoiding obstacles, at a maximum 
range of 7 m directly in front of the unit.
  Refer to page 6 for remote control signal sensor position.
SStep 
tep 33
 - DEMO function
 - DEMO function
When the unit is fi rst plugged in, a demonstration of its functions may be 
shown on the display.
If the demo setting is off, you can show a demonstration by selecting 
“DEMO ON”.
Press and hold [–DEMO, 
7].
The display changes each time the button is held down.
DEMO ON
DEMO OFF
While in standby mode, select “DEMO OFF” to reduce power 
consumption.
RQTV0102_1B.indd   5
RQTV0102_1B.indd   5
2/6/06   11:59:35 AM
2/6/06   11:59:35 AM