Panasonic KXMB2061FX 작동 가이드
Feature/Code
Selection
Setting the toner
maintenance time
MBNM1NM5NM8N
maintenance time
MBNM1NM5NM8N
The base unit will automatically activate for maintenance, once every 24 hours.
Because this is to prevent the toner from solidifying, the noise that the base unit
makes during maintenance cannot be stopped. However, if the base unit’s noise
bothers you, you can change the start time.
1. MMenuN A MBNM1NM5NM8N A MSetN
2. Enter the maintenance start time.
Because this is to prevent the toner from solidifying, the noise that the base unit
makes during maintenance cannot be stopped. However, if the base unit’s noise
bothers you, you can change the start time.
1. MMenuN A MBNM1NM5NM8N A MSetN
2. Enter the maintenance start time.
R The default time is “12:00”.
R If you selected 12-hour time entry (page 28), press MHN repeatedly to
R If you selected 12-hour time entry (page 28), press MHN repeatedly to
select AM or PM.
24-hour time entry.
3. MSetN A MMenuN
Resetting all features (and
deleting all data in memory)
MBNM1NM5NM9N
deleting all data in memory)
MBNM1NM5NM9N
Before you dispose of, transfer or return the product, activate this feature to
reset all programmable features and to delete all data stored in memory.
Phonebook (or caller information) and fax transmission data (journal report and
faxes received in memory) will be deleted.
M0N “NO” (default)
M1N “YES”
R Disconnect the telephone line cord, USB cable and LAN cable before
reset all programmable features and to delete all data stored in memory.
Phonebook (or caller information) and fax transmission data (journal report and
faxes received in memory) will be deleted.
M0N “NO” (default)
M1N “YES”
R Disconnect the telephone line cord, USB cable and LAN cable before
activating this feature.
R Date and time setting on the cordless handset programming will also be
To reset all features:
1. MMenuN A MBNM1NM5NM9N
2. Press M1N to select “YES”. A MSetN
3. Press M1N to select “YES”. A MSetN
1. MMenuN A MBNM1NM5NM9N
2. Press M1N to select “YES”. A MSetN
3. Press M1N to select “YES”. A MSetN
Setting the ringtone for
outside calls
outside calls
MBNM1NM6NM1N
M1N “RINGTONE 1” (default)
M2N “RINGTONE 2”
M3N “RINGTONE 3”
M4N “RINGTONE 4”
M5N “RINGTONE 5”
M6N “RINGTONE 6”
M2N “RINGTONE 2”
M3N “RINGTONE 3”
M4N “RINGTONE 4”
M5N “RINGTONE 5”
M6N “RINGTONE 6”
Setting the beep sounds and
keytones
keytones
MBNM1NM6NM5N
M0N “OFF”: Deactivate this feature.
M1N “ON” (default): You will hear confirmation/error beep sounds and keytones.
M1N “ON” (default): You will hear confirmation/error beep sounds and keytones.
Note:
R Even if this feature is set to “OFF”, the unit beeps in some cases. For
R Even if this feature is set to “OFF”, the unit beeps in some cases. For
example:
– the memory reception alert setting (feature #437 on page 83) is
– the memory reception alert setting (feature #437 on page 83) is
activated.
– the top cover is opened.
Changing the ring count in
FAX ONLY mode
MBNM2NM1NM0N
FAX ONLY mode
MBNM2NM1NM0N
M1N “1”
M2N “2” (default)
M3N “3”
M4N “4”
M5N “5”
M6N “6”
M7N “7”
M8N “8”
M9N “9”
M2N “2” (default)
M3N “3”
M4N “4”
M5N “5”
M6N “6”
M7N “7”
M8N “8”
M9N “9”
78
10. Programmable Features