Panasonic ty-fb9te 작동 가이드

다운로드
페이지 24
23
Symptoms
Checks
Picture
Sound
Snowy Picture
Noisy Sound
Aerial location, direction or connection
Multiple Images
Normal Sound
Aerial location, direction or connection
Interference
Noisy Sound
Electrical appliances
Cars / Motorcycles
Fluorescent lights
Switch on P-NR in Menu to reduce picture noise.
Normal Picture
No Sound
Volume level
Sound mute switched on.
No Picture
No Sound
The set to AV mode. Not plugged into AC outlet. Not switched on.
Picture / Sound controls set at minimum levels.
Check if in Standby mode.
No Colour
Normal Sound
Colour controls set at minimum levels.
Colour System
Poor or Distorted 
Picture
Weak or No Sound
Retune Channel (s).
Normal Picture
Weak or 
Distorted Sound
Sound reception may have deteriorated.
Switch MPX setting to Off until reception improves.
No teletext operation
Hospitality Mode “OFF” in HOTEL MODE
No Hospitality Mode operation
Hospitality Mode “ON” in HOTEL MODE
Input signal switch malfunctioning
SYSTEM MODE settings
“Please check the position of the installed slot” is displayed.
Check to make sure the terminal board is installed in the correct slot and 
confirm that the “Serial Slot Select” item of the display to set to “Slot2.”
(see page 4)
Specifications
TY-FB9TE
Receiving Systems /
Band name
PAL B, G, H, SECAM B, G SECAM L / L’
 
VHF E2 - E12 
 
VHF H1 - H2 (ITALY)
 
VHF A - H (ITALY) 
 
UHF E21 - E69
 
CATV (S01 - S05) 
 
CATV S1 - S10 (M1 - M10)
 
CATV S11 - S20 (U1 - U10) 
CATV S21 - S41 (Hyperband)
PAL D, K, SECAM D, K
 
VHF R1 - R2 
 
VHF R3 - R5
 
VHF R6 - R12 
 
UHF E21 - E69 
PAL 525/60 
Playback of NTSC tape from some PAL Video re corders (VCR)
M.NTSC 
Playback from M. NTSC Video recorders (VCR)
NTSC (AV input only) 
Playback from NTSC Video recorders (VCR)
OUTPUT
AUDIO OUT
AUDIO L-R (RCA Pin Type × 2)
0.5 Vrms
VIDEO OUT
VIDEO (BNC Type)
1.0 Vp-p (75 
Ÿ)
Others
Ir System terminal × 1
INPUT
AUDIO IN
AUDIO L-R (RCA Pin Type × 2)
0.5 Vrms
VIDEO IN
VIDEO (BNC Type)
S-VIDEO (MINI DIN 4-pin)
1.0 Vp-p (75 
Ÿ)
Y:1.0 Vp-p (75 
Ÿ) C:0.286 Vp-p (75 Ÿ) (NTSC) C:0.3 Vp-p (75 :) (PAL)
ANT-IN
UHF / VHF
Mass (Weight)
0.55 kg
Note:
Design and specifications are subject to change without notice. Mass and dimensions shown are approximate.
Troubleshooting
If there is a problem with your set please refer to the table below to determine the symptoms, then carry out the 
suggested check. If this does not solve the problem, please contact your local Panasonic dealer, quoting the model 
number and serial number.