Panasonic KX-TG6324 작동 가이드
Useful Information
48
For assistance, please visit http://www.panasonic.com/help
Answering system (KX-TG6322/KX-TG6323/KX-TG6324)
The 2nd caller’s information is
not displayed during an outside
call.
not displayed during an outside
call.
L
In order to use Caller ID, call waiting, or Call
Waiting Caller ID (CWID), you must first
contact your service provider/telephone
company and subscribe to the desired
service.
After subscribing, you may need to contact
your service provider/telephone company
again to activate this specific service, even if
you already subscribed to both Caller ID and
Call Waiting with Caller ID services (CWID).
Waiting Caller ID (CWID), you must first
contact your service provider/telephone
company and subscribe to the desired
service.
After subscribing, you may need to contact
your service provider/telephone company
again to activate this specific service, even if
you already subscribed to both Caller ID and
Call Waiting with Caller ID services (CWID).
Problem
Cause/solution
The unit does not record new
messages.
messages.
L
The answering system is turned off. Turn it on
(page 32).
(page 32).
L
The message memory is full. Erase
unnecessary messages (page 33).
unnecessary messages (page 33).
L
The recording time is set to “Greeting
only”. Change the setting (page 37).
only”. Change the setting (page 37).
L
If you subscribe to the voice mail service,
messages are recorded by your service
provider/telephone company not your
telephone. Change the unit’s number of rings
setting or contact your service
provider/telephone company (page 36).
messages are recorded by your service
provider/telephone company not your
telephone. Change the unit’s number of rings
setting or contact your service
provider/telephone company (page 36).
I cannot operate the answering
system.
system.
L
Someone is using the unit. Wait for the other
user to finish.
user to finish.
L
A caller is leaving a message. Wait for the
caller to finish.
caller to finish.
L
The handset is too far from the base unit.
Move closer.
Move closer.
I cannot operate the answering
system remotely.
system remotely.
L
You are entering the wrong remote access
code. If you forgot the remote access code,
store a new remote access code (page 35).
code. If you forgot the remote access code,
store a new remote access code (page 35).
L
Press each key firmly.
L
The answering system is turned off. Turn it on
(page 36).
(page 36).
L
You are using a rotary/pulse telephone. Try
again using a touch-tone phone.
again using a touch-tone phone.
Problem
Cause/solution
TG63xx_OI.book Page 48 Thursday, January 10, 2008 9:02 AM