Panasonic DMREX95V 작동 가이드

To Others

Tuning
Disc

Picture
Sound

Display

Connection

Others

VHS

TV Aspect

Progressive

TV System

4:3

Off

PAL

AV1 Output

Video

AV2 Settings

HDMI Settings

Tuning
Disc
Picture

Sound

Display

Connection

Others

AV2 Input

RGB / Video

AV2 Settings

SELECT

RETURN

ENTER

VHS

RGB / Video

AV2 Input

RGB

Video

S Video

Ext Link

Ext Link 2

RGB / Video: Is detected automatically.
RGB, Video, S Video: Input is switched to the selected signal.

Select the TV screen format of your television. Programmes in 16:9 format are recorded
in 4:3 format. 16:9 format is used to record to RAM.
Letterbox: Black bars appear on the upper and lower edges of the screen.

On: The signal is displayed in full-picture quality using COMPONENT VIDEO OUT.

PAL: You connect the unit to a PAL- or multi-system television. Programmes that were
recorded with NTSC are played as PAL60.
NTSC: You connect the unit to an NTSC television. Programmes that were recorded
with NTSC are played as NTSC.

RGB 1 ( without component ): RGB output is available all the time while this unit is on.

RGB 2 ( without component ): RGB output is available only during playback or 
on-screen display. If RGB 1 or 2 is set, there is no signal available on COMPONENT 
VIDEO OUT.

Video ( with component ): Factory-default settings

AV-Link function
Switching between television reception and 
the signal from the DVD Recorder. This 
function is only possible if the AV1 Output is 
set to [Video ( with component )] or 
[RGB 2 ( without component )].
DVD recorder signal: Press 

ENTER + 0. 

DVD appears on the display.
Television reception: Press the buttons again. 
TV appears on the display.

Perform the settings in the
following submenus for the
connected unit.

Ext Link 1: 

For digital receivers that send a special recording control signal, for
example, the F.U.N. receiver (TU-DSF41)

Ext Link 2: 

External recording control for satellite or digital receivers (video signal).

HDMI (High Definition Multimedia Interface) is a digital interface for Audio and Video. 
One single cable transfers both digital video data (picture data) and also digital audio 
data. There is no longer any need to convert analogue-digital or digital-analogue. HDMI 
works without data compression so that there is therefore no quality loss from the 
system.

Active Antenna

Off

If the unit is connected to HDMI,  [Video ( with component )] is switched on automatically.

On: when connecting an aerial supplied via the power circuit of the  DVD Recorder. Start 
the Auto-Setup again after making the adjustment and check the Signal Condition.

Changeover not possible when  HDMI Video Format is set to [Automatic] and when 
using the HDMI connection.

Not NTSC:
RGB / Video, S Video, Ext Link 1, Ext Link 2