Panasonic nvvp33 작동 가이드
21
TV screen
The picture with interference
On-Screen Display
Test pattern indication
Removing Interference / Changing RF-output channel
In some cases, interference (lines or patterning) or a very poor picture may
appear on the TV when the VCR/DVD is connected. If this happens, follow
the steps below to change the video playback channel (RF output channel)
to remove the interference.
appear on the TV when the VCR/DVD is connected. If this happens, follow
the steps below to change the video playback channel (RF output channel)
to remove the interference.
!
Press the MENU button for more than 5 seconds. The RF output channel
number is displayed on the VCR display.
VCR Ch:28
The clear picture
!
Press ENTER to finish this setting.
!
Press the Numeric buttons or use the Channel (CH) button
to select a channel number, which differs by 2 or 3 from the
present channel number. (For example, if the original
channel number was 28, enter 31.)
to select a channel number, which differs by 2 or 3 from the
present channel number. (For example, if the original
channel number was 28, enter 31.)
21
68
(RF OFF)
...
!
Retune your TV until you receive the Test pattern. It may be necessary to
repeat steps above until you can see the Test pattern clearly. If using a Scart
cable please see the note below.
repeat steps above until you can see the Test pattern clearly. If using a Scart
cable please see the note below.
VCR display
Indication when the RF output
channel is 28 (example)
Indication after changing the RF
output channel to 31 (example)
Test pattern indication
VCR Ch:31
8
9
!
Press MENU for about 5 seconds. The preset channel will be
displayed on the VCR-display.
displayed on the VCR-display.
!
Press channel select buttons CH or 0 to invoke [- -].
!
Confirm with ENTER.
D
Set the RF output channel of the VCR/DVD to [- -] (RF OFF) if the VCR/DVD
is connected to the TV via the 21-pin Scart cable.
is connected to the TV via the 21-pin Scart cable.
MENU
TRACKING/V-LOCK