Panasonic nvvp33 작동 가이드

Lets you change the basic settings or your appliance.

Resets the appliance to factory defaults. Following reset and 
initialisation, press 

SETUP to run the QUICK SETUP utility again. 

40

40

Your equipment 
can not decode 
the signal

Your equipment 
can decode the 
signal

Dolby 

Digital

DTS Digital 

Surround

MPEG

PCM

PCM

PCM

Bitstream

Bitstream

Bitstream

Please choose the correct settings 

matching your audio system:

PCM is the standard method used to record digital music signals on Audio 
CDs. For reasons of copyright protection, the digital output of PCM audio 
signals may be limited to 48 kHz/16 bit. Choose [Up to 48 kHz] if the digital 
audio outlet is used to connect your player to an amplifier that only processes 
sampling frequencies of up to 48 kHz. For 96 kHz check the digital-in 
requirements of your connected device.

Change the setting to PCM if the connected equipment fails to decode the 
relevant signal. High noise levels may otherwise damage your ears or the 
loudspeakers. Adapt the settings to the ratings of your audio system. 

Available in the Dolby Digital (DVD) format only.

The volume range is compressed by dynamically putting up the level of 

soft passages and lowering the level of loud passages.

Select the language of the appliance's menus as appropriate.

Select [Off] to suppress the display of OSD text.