Panasonic nvvp33 작동 가이드

!

Set Clock set to [AUTO].

!

If the device cannot find a TV station transmitting the time signal, set Time and Date manually.

!

The use of E-300 cassettes may cause problems if the recordings were taken at 
low tape speeds LP or EP.

!

Verify that the aerial and/or Scart cables are attached and work properly.

!

Check the SQPB/ S-VHS playback setting for S-VHS cassettes.

!

Please contact your service technician if the video heads are dirty or worn out. 
Having a technical service shop clean the video heads is not covered by the guarantee.

!

If  

 flashes on the device, check if the protection tab of the video cassette is still in.

!

Check Time and Date.

!

Check the start and stop time of the timer programme.

!

Check if the 

TIMER button has been pressed to put the device into timer mode 

after programming a recording.

!

Check the start and stop time of a PDC recording. Not all stations currently support the 
VPS/PDC control times (turn on/off).

!

If you notice interference or a shift of the picture during normal, still or slow motion playback, press the 

TRACKING / V-LOCK button towards + or - to correct the picture.

!

 

Press 

+ and - together to actuate automatic correction. Some video cassettes do not support tracking 

control. This is not indicative of a malfunction.

 38

 38

28

29

!

You are trying to perform a function using the remote control, but the device in timer mode. You cannot 
perform this function right now. Please quit timer mode by pressing the 

TIMER button.