Panasonic DMREX769EB 작동 가이드
70
RQT9307
Additional Connections
AV1(TV)
AV
HDMI IN
HDMI OUT
HDMI IN
HDMI AV OUT
This unit
TV
Receiver
When connected to an HDMI compatible unit, an
uncompressed digital audio and video signal is
transmitted, enabling you to enjoy high quality, digital
video and audio with just one cable. When connecting to
an HDMI-compatible HDTV (High Defi nition Television),
the output can be switched to 1080p, 1080i or 720p HD
video.
Please use High Speed HDMI Cables that have the
Please use High Speed HDMI Cables that have the
HDMI logo (as shown on the cover).
When setting video output to “1080p”, please use the
HDMI cables 5.0 meters or less.
Connecting with an HDMI (High Defi nition
Multimedia Interface) Terminal
Multimedia Interface) Terminal
Using an HDMI (High Defi nition Multimedia
Interface) Cable (not included)
Interface) Cable (not included)
Notes
If connecting to equipment that is only compatible with 2 channel
audio output, audio with 3 channels or more will be down-mixed
(¼ 84) and output as 2 channels, even if connecting with an
HDMI cable (some discs cannot be down-mixed).
(¼ 84) and output as 2 channels, even if connecting with an
HDMI cable (some discs cannot be down-mixed).
You cannot connect this unit to DVI devices that are incompatible
with HDCP.
For display units compatible with HDCP (High-Bandwidth Digital
Content Protection) that are equipped with a digital DVI input
terminal (PC monitors, etc.):
Depending on the unit, picture may not be displayed properly or
at all when connecting with a DVI/HDMI switching cable (audio
cannot be output).
For display units compatible with HDCP (High-Bandwidth Digital
Content Protection) that are equipped with a digital DVI input
terminal (PC monitors, etc.):
Depending on the unit, picture may not be displayed properly or
at all when connecting with a DVI/HDMI switching cable (audio
cannot be output).
Set “Digital Audio Output” to “HDMI and Optical” (¼ 65).
(The default setting is “HDMI and Optical”.)
This method allows you to enjoy multi-channel surround
sound on DVD-Video.
sound on DVD-Video.
Use this connection to play sound through speakers
connected to an amplifi er or system component.
Connect to terminals of the same colour.
connected to an amplifi er or system component.
Connect to terminals of the same colour.
You can improve sound quality by connecting this unit to
an amplifi er or system component using the audio cable
or the optical digital audio cable.
an amplifi er or system component using the audio cable
or the optical digital audio cable.
This unit
Amplifier or System Component
OPTICAL
OPTICAL IN
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
Insert fully with this side up.
Do not bend cable sharply.
Do not bend cable sharply.
AUDIO IN
R
L
AUDIO
VIDEO
This unit
Amplifier
or
System Component
L
R
Connect an amplifier or system component with a built-
in Dolby Digital, DTS or MPEG decoder.
Adjust settings in “Digital Audio Output” (¼ 63).
Connecting with a Panasonic TV (VIERA)
If the 21-pin Scart cable is connected, the following
functions are available.
Direct TV Recording (¼ 25)
Direct TV Recording (¼ 25)
Watching Digital Satellite Programmes (¼ 18)
(In this case, make sure to switch the television input to “AV”.)
Using an Optical Digital Audio Cable (not
included) for Better Sound
included) for Better Sound
Regarding VIERA Link “HDAVI Control
TM
” function
When connecting with a Panasonic TV (VIERA)
or a receiver equipped with the “HDAVI Control”
function, linked operations would be possible. [¼ 40,
Linked Operations with the TV (VIERA Link “HDAVI
Control
TM
”/Q Link)]
It is recommended that you use Panasonic’s HDMI
cable.
Recommended part number: RP-CDHG10 (1.0 m),
RP-CDHG15 (1.5 m), RP-CDHG20 (2.0 m), RP-
CDHG30 (3.0 m), RP-CDHG50 (5.0 m), etc.
Non-HDMI-compliant cables cannot be utilised.
Notes
When this unit is connected to an amplifi er with an optical digital
audio cable and connected to a television with an HDMI cable,
you can enjoy the highest quality of audio from the disc by setting
“Digital Audio Output” to “Optical Only” in the Setup menu (¼ 65).
In this case audio is only output from the amplifi er not the
television.
you can enjoy the highest quality of audio from the disc by setting
“Digital Audio Output” to “Optical Only” in the Setup menu (¼ 65).
In this case audio is only output from the amplifi er not the
television.
You cannot use DTS Digital Surround decoders not meant for
DVD.
Before purchasing an optical digital audio cable, check the
terminal shape of the equipment to be connected.
Using an Audio Cable (not included) for
Better Sound
Better Sound
DMR-EX769EB.indb 70
DMR-EX769EB.indb 70
2009/01/26 17:06:23
2009/01/26 17:06:23