Panasonic DMR-ES30V 작동 가이드

DVD

RAM -R

( )

-RW V +R

RAM

RAM -R

( )

-RW V +R

Recording

Pause during recording

Press PAUSE to pause the recording.

Press PAUSE again to resume recording.
The title is not divided.

Use CH , or the number buttons to select the TV channel.

Use INPUT SELECT to select the AV channel for externally connected devices.

Press REC MODE to select the recording mode.

Press REC to start the recording.

Press STOP

to stop the recording.

If you have activated the write-protection, cancel it.

Recording television programmes

Using

AUDIO, you can change the received audio channel during the recording.

It has no effect on the recorded audio channel.

You can only change the channel or the record mode in pause mode.

The material is then recorded as a separate title.

You can record up to 99 titles on one disc (+R: 49 titles).

If you use an unformatted DVD-RAM, you must format it before the first recording.
The recording is saved in free areas on the disc. If there is no more space left on
the target drive, you must delete recordings or use a new disc.
When recording dual-channel TV programmes on DVD-R, DVD-RW or +R, only
one audio channel [M1] or [M2] can be recorded.

Quick Start
With the new Quick Start feature,
the unit is ready for use within approx.
1 second. Thus, if a DVD-RAM was
previously inserted, recording can begin
immediately after the unit is switched on
from Standby mode.

RAM

Up until the recording is stopped, it counts as 1 title.
After recording to disc is complete, it takes some time for the unit to process the
information for device control.