Panasonic DMR-ES30V 작동 가이드

ShowView

                    

 

 :enter      

 

: access

0 - 9

     : correct         

  

: return

8  3  5  4  2

Timer recording                            1 / 3

Name    Date      Start    Stop

VPS

PDC

  1  ARD

19.11. 10:30 11 :30  SP ON

- -  - - - - - - -. - -  - - :- - - - :- -    -  - - -
- -  - - - - - - -. - -  - - :- - - - :- -    - - - -
- -  - - - - - - -. - -  - - :- - - - :- -    -  - - -
- -  - - - - - - -. - -  - - :- - - - :- -    -  - - -
- -  - - - - - - -. - -  - - :- - - - :- -    -  - - -

   : select           

 

: store

 

 

 : delete             

 

 : return

ShowView

VHS

. 

!

Insert a video cassette with intact write-protection tab.

!

Press ShowView. 

!

Enter the ShowView number using the number buttons. 
Use    to delete a number. 

!

Confirm the ShowView number with ENTER. 

VPS/PDC function
If the television station sends VPS/PDC signals, the beginning and end of a 
recording are synchronised with the current air time. 
The programme start time must be set correctly to the start time given in the 
magazine.

In the Timer recording screen, check the start and end time and the VPS/PDC 
signal.
If [- - -] is displayed under Name, use  

!

Use  

, 

 

 to select the recording mode [A, SP, LP, EP].

!

Save the programme using ENTER.

!

Press    TIMER to switch the unit to timer standby mode. 
The    symbol lights up in the unit display. 

Automatic SP/LP switching
A: If the remaining tape time is not sufficient to start a programmed recording,
then the SP/LP function switches to the LP tape speed. This ensures that the 
entire programme is recorded. If the remaining time on the tape is also not 
enough in LP mode, then the programme cannot be recorded in full. 
An automatic switching to EP mode is not possible.