Panasonic DMR-ES30V 작동 가이드
Playback
50
VQT0P03
VHS
It is also possible to play back tapes recorded in the S-VHS system.
≥Some picture noise may occur depending on the type of tape used.
≥It is not possible to fully obtain the high resolution that S-VHS is
≥Some picture noise may occur depending on the type of tape used.
≥It is not possible to fully obtain the high resolution that S-VHS is
capable of.
≥It is not possible to record in the S-VHS system with the unit.
During play or while stopped
Keep pressing [
1, PLAY] for about 5 or
more seconds.
≥The “RP” indication appears on the unit’s display.
≥At the end of the programme, the tape rewinds to
≥At the end of the programme, the tape rewinds to
the beginning of the programme and plays it again
(it only works if there is at least 5 seconds blank space at the end of
the programme). This repeats until you cancel it.
(it only works if there is at least 5 seconds blank space at the end of
the programme). This repeats until you cancel it.
≥Depending on tape, this function may not work.
∫ To restart normal playback
Press [
1, PLAY].
∫ To stop play
Press [
∫, STOP].
With the TP channel, you can play a tape with high image quality on
a TV compatible with progressive output.
a TV compatible with progressive output.
Preparation
≥Connect to the TV’s component video input terminals (
≥Connect to the TV’s component video input terminals (
≥Set the output (
[1]
Press [DVD].
[2]
Press [INPUT SELECT] or [CH,
W, X] to select
the “TP” channel.
≥About TP channel (
l 59)
[3]
Press [VHS] and press [
1, PLAY].
≥Playing the tape with high image quality is initiated.
Note
≥The picture may not be displayed correctly when playing NTSC
≥The picture may not be displayed correctly when playing NTSC
tapes.
The unit usually makes tracking adjustments, but you may need to
do it manually if noise appears on a tape recorded on other
equipment.
do it manually if noise appears on a tape recorded on other
equipment.
During play
Keep pressing [TRACKING/V-LOCK,
r] or
[TRACKING/V-LOCK,
s] until the noise bars
disappear.
≥If the noise bars appear during still playback, switch the VHS over
to the slow playback mode and then adjust the tracking.
If the still picture shakes, perform the following operation.
While paused
Keep pressing [TRACKING/V-LOCK,
r] or
[TRACKING/V-LOCK,
s] until the picture stops
shaking.
∫To return to auto tracking
Press both [TRACKING/V-LOCK,
r] and [TRACKING/V-LOCK, s]
simultaneously.
∫To remove the noise from a paused picture
Start slow play, then adjust the tracking.
Note
≥This function may not work with some TV models and tapes.
≥You can also adjust the tracking and vertical synchronization with
≥This function may not work with some TV models and tapes.
≥You can also adjust the tracking and vertical synchronization with
[CH,
W, X] on the VHS side of the main unit.
Preparation
≥Press [VHS].
≥Press [VHS].
S-VHS Quasi Playback (SQPB)
Repeat Playback
SLOW/
SEARCH
REW
FF
PLAY
S
OPERATION
SELECT
DVD ERASE
REC
REC MODE
TIME SLIP
DIRECT NAVIGATOR
TOP MENU
RETURN
CANCEL/RESET
VOLUME
CH
INPUT SELECT
STATUS
DISPLAY
AUDIO
TV
VHS
DVD
TRACKING/V-LOCK
SUB MENU
VHS
DVD
CREATE
CHAPTER
JET REW
SKIP/ INDEX
TIMER
DUBBING
A
B
C
FUNCTIONS
G-Code
F Rec
DVD/ VHS
PROG/CHECK
AV
PLAY
REC
REC MODE
CH
STATUS
TV
AV
VHS
DVD
TRACKING/V-LOCK
INPUT SELECT
REC MODE
DVD
VHS
STATUS
AV
INPUT SELECT
1
;
∫
CH,
W, X
TRACKING/
V-LOCK,
V-LOCK,
r, s
CH,
W, X
µ
Numeric
buttons
Playing a tape with high image quality
Adjusting the playback picture
∫ Manual tracking
∫ Vertical locking adjustment
M7620(GN).book 50 ページ ２００５年５月２５日 水曜日 午後１２時２分