Panasonic dmr-e60eb 지침 매뉴얼

다운로드
페이지 82
76
Troubleshooting guide (continued)
Displays
Play
The display is dim.
≥Go to Display in the SETUP menus and change the display’s brightness with “FL Display”. 
(page 62)
“0:00” is flashing on the unit’s 
display.
≥The clock is not set.
Go to Settings in the SETUP menus and set the clock with “Clock”. (page 66)
“NO READ” appears on the unit’s 
display after using a lens cleaner.
≥Take the cleaner out of the unit.
Play fails to start even when [
1] 
(26) is pressed.
Play starts but then stops 
immediately.
“NO READ”, “UNSUPPORT”, “NO 
DISC” or “NO PLAY” appears on 
the unit’s display.
≥Insert the disc correctly with the label facing up. (page 20)≥This unit cannot play discs other than DVD-RAM, DVD-R, DVD-Audio, DVD-Video, Video CD, 
CD and MP3 disc. (page 10)
≥The disc is dirty. Clean it. (page 70)≥The disc may be badly scratched. (page 70)≥You inserted a blank DVD-RAM or DVD-R.
No response when buttons 
pressed.
≥If “
” appears on the television
the operation is prohibited by the unit or disc.
≥If the unit is not operating at all, press [
, TIMER] 
(14) to switch the unit to standby, then press 
[
, TIMER] 
(14) again to turn the unit on. The unit may not be operating correctly due to 
lightning, static electricity, or some other external factor.
≥The Child Lock function is activated. (page 56)
A title or chapter doesn’t play 
when it is selected.
≥Some titles and chapters on DVD-Video are not played when you have changed the ratings 
level. (page 64)
Picture distorted during search.
≥Some distortion is normal.
Alternative soundtrack and 
subtitles cannot be selected.
≥The languages are not recorded on the disc.
≥You may have to use the disc’s own menus to select languages.
Soundtrack/subtitle language is 
different from the one selected 
with the SETUP menus.
≥The language is not recorded on the disc. (page 61)
No subtitles.
≥Subtitles are not recorded on the disc.
≥Turn the subtitles on. (page 47)
Angle cannot be changed.
≥This function depends on software availability. Angles can only be changed during scenes where 
different angles are recorded (“
” appears on the display).
You have forgotten your ratings 
password.
≥Return the unit's settings to the initial state (factory setting).
With the tray open, keep pressing [
:/6] and [5/9] (49) on the main unit 
simultaneously for 5 or more seconds.
B.book  76 ページ  2003年5月2日 金曜日 午前10時8分