Panasonic DP-C322 작동 가이드
10
System Configuration
Relay XMT Password
Note:
The
Relay XMT Password in the Fax Driver
and the device need to match, otherwise, the
transmission will fail. The default value of the
Relay
XMT Password of the device is not set, and the
Fax Driver is "0000". You need to change the Fax
Driver's XMT Password if you set the device's
Password other than "0000".
The
Relay XMT Password on the device is set
to the
Fax/Email Settings User Parameter (No.
36). (For details, refer to Fax/Email Settings of the
Operating Instructions (For Function Parameters)
on the provided CD-ROM.)
Community Name
Enter the same community name1 as is set on
the device.
Enter the same community name1 as is set on
the device.
Note:
The
Community Name1 on the device is set to the
General Settings (No. 51). (For details, refer to
General Settings in the Operating Instructions (For
Function Parameters) on the provided CD-ROM.)
If the community name1 is not matched with the
setting of the device, some of the Fax options are
disabled, because the device information cannot be
acquired properly.
Enter the password set as the LAN relay XMT
password on the device.
password on the device.
Acquire device phonebook
Specify whether the phonebook data is acquired
from the device.
6.
Detailed Settings
Specifies detailed settings.