Panasonic KX-TG6702 작동 가이드
Preparation
12
For assistance, please visit http://www.panasonic.com/phonehelp
Setting up the handset
Connecting the charger
(KX-TG6702 only)
(KX-TG6702 only)
L
Use only the included Panasonic AC
adaptor PQLV207 or PQLV219.
adaptor PQLV207 or PQLV219.
Note:
L
The AC adaptor must remain connected
at all times. (It is normal for the adaptor
to feel warm during use.)
at all times. (It is normal for the adaptor
to feel warm during use.)
L
The AC adaptor should be connected to
a vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to
a ceiling-mounted AC outlet, as the
weight of the adaptor may cause it to
become disconnected.
a vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to
a ceiling-mounted AC outlet, as the
weight of the adaptor may cause it to
become disconnected.
Battery installation/replacement
1
Press the notch of the handset cover
firmly, and slide it in the direction of the
arrow.
firmly, and slide it in the direction of the
arrow.
L
If necessary, remove the old battery.
2
Insert the battery (
A), and press it
down until it snaps into position (
B).
Then close the handset cover (
C, D).
Important:
L
Use only the rechargeable Panasonic
battery noted on page 5.
battery noted on page 5.
Attention:
A nickel metal hydride battery that is
recyclable powers the product you have
purchased.
recyclable powers the product you have
purchased.
Fasten the AC adaptor cord to prevent
it from being disconnected.
it from being disconnected.
(120 V AC, 60 Hz)
Bottom of
the charger
the charger
Hooks
A
B
C
D
TG6700.book Page 12 Monday, August 18, 2008 9:08 PM