Panasonic DMRE100HEG 작동 가이드

∫ Advanced Operations

[HDD] [RAM]

[6] Press 

 (“To find 

the desired points”, 
page 36)

[7] Press 

[8] Select “Exit” with [

3, 4] and press 

[9] Select 

2] and 

≥Play lists created 

with the erased 
part are also erased.

ªTo erase another part of the same programme

After storing the point in “Start” and “End”, select “Next” in step 8 
and perform step 9, then repeat steps 6–9.

For your reference
≥Use search and slow-motion to find the points.
≥You may not be able to specify start and end points within 

3 seconds of each other.

≥You cannot specify start and end points if the picture recorded is 

stilled.

≥The unit pauses when the programme reached to the end during 

this procedure.

≥The disc’s available recording time may not increase after 

erasing short parts of programmes.

[HDD] [RAM]

You can divide a selected programme into two.
You must make sure of dividing a programme because it 
cannot be recovered after the procedure.

[6] Press 

(“To find the desired 
points”, page 36)

[7] Select “Exit” with [

3, 4] and press 

[8] Select 

2] and 

≥The programme is divided at the point.

ªTo change the point to divide

Press [

3, 4] to select “Divide” and press [ENTER] at the point you 

want to change.

ªTo check the division point

By selecting “Preview” in step 7 and pressing [ENTER], play will 
begin from a point 10 seconds prior to or after the division point. 
You can make sure that the division point is appropriate.

Note
≥A little portion of the recording directly preceding the division 

point may be lost.

For your reference
≥The divided programmes retain the title of the original 

programme. They also remain CPRM property (page 8) of the 
original.

≥Use search and slow-motion to find the points.
≥It is not possible to carry out “Divide” in the following cases:

- When the resulting part(s) are extremely short.
- When the total number of programme is more than 250 (HDD)/

99 (DVD-RAM).

[DVD-R]
You can select the still picture to be displayed after finalizing.
Usually, the top scene of the programme (scene of 1 second after 
starting) appears. However, you can select your favourite scene in 
the programme.

[6] Press 

t1.3] 

[7] Press 

 (“To find the desired points”, 

page 36)

[8] Press 

≥A scene of display 

is changed at the 
point.

≥You cannot select the 

top and end of the 
programme.

1 Partial Erase

3

Current programme number

3

3

1 Divide

3

1 Change thumbnail

3

3

DVD(PAL).book  35 ページ  ２００３年７月１６日 水曜日 午後３時２１分