Panasonic KXFL403FX 작동 가이드
6. Programmable Features
41
6.3 Advanced features
Feature/Code
Selection
Setting the journal report
to print automatically
{#}{
to print automatically
{#}{
2}{2}
{
1} “
ON” (default): The unit will print a journal report automatically after
every 30 new fax transmissions and receptions (page 28).
{
{
2} “
OFF”: The unit will not print a journal report, but will keep a record of
the last 30 fax transmissions and receptions.
Sending documents
overseas
{#}{
overseas
{#}{
2}{3}
If you cannot send a fax overseas even if the number is correct and the line
is connected, activate this feature before sending the fax.
This feature improves the reliability by reducing the transmission speed.
{
is connected, activate this feature before sending the fax.
This feature improves the reliability by reducing the transmission speed.
{
1} “
NEXT FAX”: This setting is effective only for the next attempted fax
transmission. After transmission, the unit will return to the previous setting.
{
{
2} “
OFF”: Deactivates this feature.
{
3} “
ERROR” (default): When the previous fax transmission fails and you
wish to re-send the document.
Note:
L
This feature is not available for broadcast transmission.
L
Calling charges may be higher than usual.
Sending a fax at a specific
time
{#}{
time
{#}{
2}{5}
This feature allows you to take advantage of low-cost calling hours offered
by your telephone company. This feature can be set up to 24 hours in
advance of the desired time.
{
by your telephone company. This feature can be set up to 24 hours in
advance of the desired time.
{
1} “
ON”
{
2} “
OFF” (default)
To send a document:
1. Insert the document.
2. If necessary, press {A} or {B} repeatedly to select the desired
resolution (page 27).
3. Press {MENU}.
4. Press {#}, then {2}{5}.
5. Press {1} to select “
ON”.
6. Press {SET}.
7. Enter the fax number.
L
To enter an item using one-touch dial feature and phonebook, see
step 4, “4.3 Sending a fax using one-touch dial feature and
phonebook”, page 29. (When using phonebook, you do not have to
press {>} before pressing {A} or {B}.)
step 4, “4.3 Sending a fax using one-touch dial feature and
phonebook”, page 29. (When using phonebook, you do not have to
press {>} before pressing {A} or {B}.)
8. Press {SET}.
9. Enter the transmission start time.
L
If you selected 12-hour time entry (page 17), press {*} repeatedly
to select AM or PM.
to select AM or PM.
L
If you selected 24-hour time entry (page 17), the time is set using
24-hour time entry.
24-hour time entry.
10. Press {SET}.
L
To cancel after programming, press {STOP} then {SET}.
Setting the caller
information list to print
automatically
{#}{
information list to print
automatically
{#}{
2}{6}
{
1} “
ON”: The unit will print the caller information list automatically after
every 30 new calls (page 23).
{
{
2} “
OFF” (default): The unit will not print the caller information list, but will
keep records of the information for the last 30 callers.
FL403FX-PFQX2655ZA-en.book Page 41 Friday, July 7, 2006 6:28 PM