Panasonic SLDZ1200 작동 가이드

RQT8173

Set the unit up on an even surface away from direct sunlight, high

temperatures, high humidity, and excessive vibration. These condi-
tions can damage the cabinet and other components, thereby short-
ening the unit’s service life.

Do not place heavy items on the unit.

Do not use high voltage power sources. This can overload the

unit and cause a fire.

Do not use a DC power source. Check the source carefully when

setting the unit up on a ship or other place where DC is used.

Ensure the AC mains lead is connected correctly and not dam-

aged. Poor connection and lead damage can cause fire or electric
shock. Do not pull, bend, or place heavy items on the lead.

Grasp the plug firmly when unplugging the lead. Pulling the AC

mains lead can cause electric shock.

Do not handle the plug with wet hands. This can cause electric

shock.

Do not let metal objects fall inside the unit. This can cause electric

shock or malfunction.

Do not let liquids get into the unit. This can cause electric shock

or malfunction. If this occurs, immediately disconnect the unit from
the power supply and contact your dealer.

Do not spray insecticides onto or into the unit. They contain flam-

mable gases which can ignite if sprayed into the unit.

Do not attempt to repair this unit by yourself. If sound is inter-

rupted, indicators fail to light, smoke appears, or any other problem
that is not covered in these operating instructions occurs, disconnect
the AC mains lead and contact your dealer or an authorized service
center. Electric shock or damage to the unit can occur if the unit is
repaired, disassembled or reconstructed by unqualified persons.

Extend operating life by disconnecting the unit from the power

source if it is not to be used for a long time.

This direct drive digital turntable is designed for DJs to play digital
media (CDs and SD audio) giving an analogue-like feeling. Having
the feeling of an analogue turntable, this unit delivers digitally robust
functions and performance realizing a new style of play.

Play media is synchronized with platter movement.

Use your hand to turn the platter slip surface for scratch, brake and
spin DJ play.

You can switch the platter to freewheel.

The rotation direction of the platter can be reversed by switching the
play direction switch to REVERSE or FORWARD.

•You can control the play speed (tempo).
•You can adjust the tempo to 4 levels of settings between 

±8 and

±50 using the RANGE button.

•You can instantly return to normal playing speed using the RESET

button.

•By using the PITCH LOCK button the pitch is held even if the tempo

is changed.

You can use the red strobo illuminator to check changes in tempo.

You can set the IN and OUT points and play as a loop.

•You can store up to 4 audio segments to memory.
•You can use for dual play for up to 2 sample pads, and use for

switching between one shot and loop play.

•Setting the cue point

Store the cue point to memory.

•Back cue

During play you can instantly return to the set cue point and the
unit waits in the pause state.

You can store 4 cue points to memory. Play can be started instantly
from one of those cue points.

You can simulate sound similar to an analogue player.

You can transform sound by using the platter.

Selects CD or SD play.

You can SAVE and LOAD sample pad, cue point panel data etc. to
the SD Memory Card.

CD slot (Slot in type)

Mode for DJ play.

Mode for use as an audio player.

Insertion of connector
Even when the connector is per-
fectly inserted, depending on the
type of inlet used, the front part of
the connector may jut out as shown
in the drawing.
However there is no problem using
the unit.
Illustrations may differ from actual
connector.

Connector

Approx. 6 mm
Appliance inlet