Panasonic BL-PA100KT 매뉴얼
English
1
Connect the master adaptor (indicated by the
MASTER seal) to the wall outlet using the
included AC cord.
MASTER seal) to the wall outlet using the
included AC cord.
For best results
We recommend connecting the adaptors directly to a wall outlet. Avoid connecting high power-consuming appliances to the same
wall outlet. Additionally, connecting an adaptor to a uninterruptible power supply (UPS) or backup power supply device is not
recommended.
While connecting the adaptors to a wall outlet is recommended, keep the following in mind if you must connect an adaptor to a
power strip:
We recommend connecting the adaptors directly to a wall outlet. Avoid connecting high power-consuming appliances to the same
wall outlet. Additionally, connecting an adaptor to a uninterruptible power supply (UPS) or backup power supply device is not
recommended.
While connecting the adaptors to a wall outlet is recommended, keep the following in mind if you must connect an adaptor to a
power strip:
- Make sure the power strip does not a have a noise filter or a surge protector, as these features may interfere with the
performance of your adaptors.
- Do not connect the adaptor to a power strip that receives power from another power strip.
- Use a power strip with an AC cord that is as short as possible.
- Use a power strip with an AC cord that is as short as possible.
For more information, refer to the included Operating Instructions (found on the CD-ROM).
Installation
2
Connect the master adaptor to a network device
using a LAN cable (sold separately). We
recommend connecting the master to your router.
using a LAN cable (sold separately). We
recommend connecting the master to your router.
3
Connect the terminal adaptor to the wall outlet
using the included AC cord.
using the included AC cord.
4
Connect the terminal adaptor to a network
device, such as your PC, using a LAN cable (sold
separately).
device, such as your PC, using a LAN cable (sold
separately).
5
Confirm that the indicators on the master adaptor
are lit (not flashing) as shown.
are lit (not flashing) as shown.
6
Confirm that the indicators on the terminal
adaptor are lit (not flashing) as shown.
adaptor are lit (not flashing) as shown.
If the indicators are not lit as shown above, confirm all
connections and refer to the Troubleshooting section of the
Operating Instructions.
connections and refer to the Troubleshooting section of the
Operating Instructions.
If the indicators are not lit as shown above, confirm all
connections and refer to the Troubleshooting section of the
Operating Instructions.
connections and refer to the Troubleshooting section of the
Operating Instructions.
To wall outlet
PLC (blue)
LAN (green)
MASTER (green)
Router
PLC (blue)
LAN (green)
MASTER (off)
To wall outlet
BL-PA100KT_GS.book Page 3 Tuesday, September 26, 2006 10:41 PM