Panasonic DMC LX 3 작동 가이드

VQT1T39

Press 3/4 to set the number of prints, and then press [MENU/SET] 

When [MULTI] has been selected, repeat steps 

 and 

 for each picture. (It is not 

possible to use the same setting for a multiple number of pictures.)

Press [‚] to return to the menu screen.

Press [MENU/SET] to close the menu.

∫ Cancelling all the [DPOF PRINT] settings
1

Press 3 to select [YES] and then press [MENU/SET].

You cannot select [CANCEL] if not even one picture has been set for DPOF printing.

∫ To print the date
After setting the number of prints, set/cancel printing with the recording date by pressing 
[DISPLAY].
•

When you go to a photo printing store for digital printing, be sure to order the printing of the 

date additionally if required.

Depending on the photo printing store or the printer, the date may not be printed even if you set 

to print the date. For further information, ask at your photo printing store or refer to the 

operating instructions for the printer.

The date cannot be printed on pictures stamped with text.

If you set [TEXT STAMP] for pictures that have been set for date printing, the date printing 

setting is cancelled.

The number of prints can be set from 0 to 999.

With a printer supporting PictBridge, the date print settings of the printer may take precedence 

so check if this is the case.

It may not be possible to use the DPOF print settings with other equipment. In this case, cancel 

all the settings, and reset the settings.

If the file is not based on the DCF standard, the DPOF print setting cannot be set.

Press 3/4 to select [SINGLE] or [MULTI] and then 

[SINGLE]

[MULTI]

Press 2/1 to select 

the picture.

Press 3/4/2/1 to 

select the pictures.

EB-DMC-LX3_eng.book  109 ページ  ２００８年７月１４日　月曜日　午後７時３８分