Panasonic DMCLX15EB 작동 가이드

다운로드
페이지 308
22
SQW0724
Preparations
Charging battery
 
If the computer enters sleep mode during charging, charging may be stopped.
 
If a notebook computer that is not connected to an electrical outlet is connected to the camera, 
the battery of the notebook computer will be depleted. Do not leave the camera and notebook 
connected for a long period of time.
 
Always connect the USB connection cable to the USB connector on your computer. Do not 
connect the USB connection cable to the USB connector of the monitor, keyboard, printer, or USB 
hub.
Charging lamp indications
Charging lamp
On: Charging in progress
Off:   Charging  complete 
(After charging stops, disconnect the camera from 
the electrical outlet or your computer.)
Flashing:   Charging  error   
(For instructions on correcting the problem, 
refer to 
(→291)
.)
Notes on charging time
When using the AC adaptor (supplied)
Charging time
Approx. 130 min.
 •The charging time indicated above is the time required for charging in case when the 
battery is completely used up. The time required for charging differs depending on 
conditions of battery usage. Charging takes longer in cases when temperatures are 
either high or low and when the battery has not been used for a long period of time.
 •The time required for charging through the computer varies depending on the power 
supply capacity of the computer.
 
Do not use any other USB connection cables except the supplied one. Doing so may cause 
malfunction of the camera.
 
Do not use any other AC adaptors except the supplied one.
 
Do not use a USB extension cable.
 
The AC adaptor (supplied) and the USB connection cable (supplied) are dedicated accessories of 
this camera. Do not use them for other devices.
 
Remove the battery after use. (The battery will be exhausted if left for a long period of time after 
being charged.)
 
If there is any trouble related to the electrical outlet (i.e. power failure), charging may not complete 
properly. Disconnect the USB connection cable (supplied) and reconnect it to the camera.
 
If the charging lamp does not light even when the camera is connected to the AC adaptor 
(supplied) or a computer, check to make sure it is properly connected.