Panasonic KX-MB2575 작동 가이드
10.2 Programming through a web browser (LAN supported models
only) y
only) y
You can change features through the web browser interface instead of the unit.
1
Start Multi-Function Station. A [Device] A [Configuration Web Page]
R You can also access the unit by entering its IP address in a web browser.
R You can also access the unit by entering its IP address in a web browser.
2
Select the desired category from the menu bar.
[Device]: features of the unit
[Network]: network features
[Directory]: registration of the address book, etc
[Device]: features of the unit
[Network]: network features
[Directory]: registration of the address book, etc
3
Type “root” as the user name, then enter the password (feature #155 on page 74). A [OK]
4
Select the desired feature from the menu.
5
Change the settings or edit the information.
R This step will vary depending on the feature.
R This step will vary depending on the feature.
6
[Submit]
R The new setting will be transferred to the unit.
R The new setting will be transferred to the unit.
7
Close the web browser.
Note:
R The settings displayed in the web browser can be updated by clicking [Reload].
R The settings displayed in the web browser can be updated by clicking [Reload].
10.2.1 Device features
You can program the features of the unit in the [Device] menu.
R Most features can be programmed from the unit. For details about the features and selections, see pages 72 to
R Most features can be programmed from the unit. For details about the features and selections, see pages 72 to
R The following features can be programmed only through the web browser interface.
Feature
Selection
Setting the PC
information for
notification of fax
reception
information for
notification of fax
reception
Select the PC to send fax reception notification message to (up to 6 destinations).
1. Start Multi-Function Station.
2. [Device] A [Configuration Web Page] A [Device]
3. Type “root” as the user name, then enter the password (feature #155 on
1. Start Multi-Function Station.
2. [Device] A [Configuration Web Page] A [Device]
3. Type “root” as the user name, then enter the password (feature #155 on
page 74). A [OK]
4. Select the [FAX FEATURE] from the menu.
5. Select [ON] from the [RECEIVE NOTIFY] drop-down list.
6. Click [Edit] next to [RECEIVE PC LIST].
7. Click [List] next to the desired destination.
8. Click the desired PC from the list. A [Submit]
9. Close the web browser.
5. Select [ON] from the [RECEIVE NOTIFY] drop-down list.
6. Click [Edit] next to [RECEIVE PC LIST].
7. Click [List] next to the desired destination.
8. Click the desired PC from the list. A [Submit]
9. Close the web browser.
97
10. Programmable Features