Panasonic KXP7500 작동 가이드

The following section explains how to install a Network Card for Ethernet (KX-PNB2) on the KX-
P7500. 

To install the network card you will need to perform the following:

•

Remove the printer cover from the right of the printer. See 

.

•

Install the network card on the printer controller board.

•

Replace the printer cover. See 

•

Configure the printer’s network setup. See Network card’s Quick Installation Guide included in the 
KX-PNB2.

•

To prevent static electricity damage to certain components (see 

), touch a grounded 

metal surface, such as the printer’s bare metal frame prior to touching the component.

•

Network Card for Ethernet (KX-PNB2)

•

Do not drop or bend the network card.

•

Do not touch the connector of the network card.

•

Protect the network card from static electricity by keeping it in its anti-static package until you are 
ready to install it.

•

Avoid exposing the network card to direct sunlight, high temperatures, or humidity.

Network Card for Ethernet