Panasonic KXFT938FX 작동 가이드
1. Installation and Quick Start
5
1.4 Recording paper
A
Open the top cover by pressing the top cover release
button (
button (
1).
B
Install the recording paper.
C
Insert the leading edge of the paper into the opening
above the thermal head (
above the thermal head (
1).
D
Pull the paper out of the unit.
L
Make sure that there is no slack in the paper roll.
E
Close the top cover securely by pushing down on
both sides.
both sides.
F
For KX-FT932:
Press {FAX/START}, then tear off the excess paper
by pulling it towards you.
Press {FAX/START}, then tear off the excess paper
by pulling it towards you.
For KX-FT938:
Press {FAX/START} to cut the paper.
Press {FAX/START} to cut the paper.
Quick Start
1.5 Fax sending / Copying
A
Open the document feeder tray.
Correct
Incorrect
1
1
Note:
L
If the paper is secured with glue or tape, cut
approximately 15 cm from the beginning of the roll
before installing it.
approximately 15 cm from the beginning of the roll
before installing it.
L
When the power cord is connected, a message is
printed each time the top cover is opened then
closed. If the recording paper is installed upside
down, the message will not be printed. Install the
paper correctly.
printed each time the top cover is opened then
closed. If the recording paper is installed upside
down, the message will not be printed. Install the
paper correctly.
L
For accessory information, see page 4.
{
FAX/START}
{
FAX/START}
FT932-938FX_PFQX2588ZA-en.book Page 5 Thursday, June 15, 2006 8:30 AM