Panasonic BL-PA100KT 작동 가이드
13
Useful Information
Understanding the indicators
PLC
Blue, lit
The adaptor is successfully connected to the
HD-PLC network.
HD-PLC network.
Blue, flashing
The terminal is being registered to the master.
Blue, flashes
once every 5
seconds
once every 5
seconds
The adaptor is registered to the master, but it is
not connected to the HD-PLC network.
not connected to the HD-PLC network.
Blue, turns off
once every 10
seconds
once every 10
seconds
The master has detected another master
adaptor. In this situation, performance will be
affected by the presence of the other master
adaptor.
adaptor. In this situation, performance will be
affected by the presence of the other master
adaptor.
Red, lit for 5
seconds
seconds
There was an error during registration. Try again.
Red, lit
The adaptor is not functioning properly and
cannot communicate over the HD-PLC network.
Contact an authorised Panasonic service centre.
cannot communicate over the HD-PLC network.
Contact an authorised Panasonic service centre.
Off
The adaptor is not plugged in.
The adaptor is not connected to the HD-PLC
network (no other adaptors found, not configured,
etc.).
The adaptor is not connected to the HD-PLC
network (no other adaptors found, not configured,
etc.).
LAN
Green, lit
A LAN cable is connected to the adaptor.
Green, flashing Data is being sent/received.
Orange, lit
There is no network device connected to the
adaptor via the LAN cable, or the network device
is not turned on.
adaptor via the LAN cable, or the network device
is not turned on.
Off
The adaptor is not plugged in.
MASTER
Green, lit
The adaptor is configured as the master.
Green, flashes
for 10 seconds
for 10 seconds
A terminal has been successfully registered to
the master.
the master.
Off
The adaptor is not configured as the master.