Panasonic KXFLB750NE 작동 가이드

다운로드
페이지 88
Safety instructions
(4)
CAUTION:
Laser radiation
L
The printer of this unit utilises a laser. Use of 
controls or adjustments or performance of 
procedures other than those specified herein 
may result in hazardous radiation exposure.
Fuser unit
L
The fuser unit is inside of the unit and gets 
hot. Do not touch it when removing the 
jammed paper or cleaning the lower glass.
Toner cartridge
L
Be careful of the following when you handle 
the toner cartridge:
Do not leave the toner cartridge out of the 
protection bag for a long time. It will 
decrease the toner life.
If you ingest any toner, drink several 
glasses of water to dilute your stomach 
contents, and seek immediate medical 
treatment.
If any toner comes into contact with your 
eyes, flush them thoroughly with water, 
and seek medical treatment.
If any toner comes into contact with your 
skin, wash the area thoroughly with soap 
and water.
Drum unit
L
Read the instructions on page 13 before you 
begin installation of the drum unit. After you 
have read them, open the drum unit 
protection bag. The drum unit contains a 
photosensitive drum. Exposing it to light may 
damage the drum. Once you have opened 
the protection bag:
Do not expose the drum unit to light for 
more than 5 minutes.
Do not touch or scratch the green drum 
surface.
Do not place the drum unit near dust or 
dirt, or in a high humidity area.
Do not expose the drum unit to direct 
sunlight.
Static electricity
L
To prevent static electricity damage to the 
interface connectors (parallel and USB), ADF 
jack or other electrical components inside the 
unit, touch a grounded metal surface, such as 
the metal part under the parallel interface 
connector before touching the components.
Caution:
The fuser unit is inside of the unit.
Do not touch the bottom of this 
cover. It is very hot.
Metal part