Panasonic KXWT115CE 작동 가이드

At the time of shipment, the batteries are not charged. 

• When the batteries are fully charged, the charge

indicator goes off and "

Fully charged" is displayed.

For more information, see "Battery Information" on

page 51.

• It is normal for the handset and charger to feel warm

while the batteries are charging.

• Keep devices sensitive to magnetic fields away from the

charger.

• Use only the included charger.

25 mm

for charger

1. Install the two screws in the wall, spacing them 25 mm apart.

20 mm or longer

Space

(2 mm)

•

 Recommended screw size is

  

M4 x 20.

25 mm

Screws
(Not supplied)

2. Mount the charger securely on the wall.

• Please copy this page and use as a reference for wall mounting.

Make sure to set the print size to correspond with the size of this page. If the dimension

of the paper output still deviates slightly from the measurement indicated here, use the

measurement indicated here.

• When mounting the charger, ensure that the correct screws are used for the type of wall.

• Make sure that the wall that the charger will be attached to is strong enough to support

the total weight of the handset and charger (approx. 190 g). If not, it is necessary for the

wall to be reinforced.

• When this product is no longer in use, make sure to detach it from the wall.

• When inserting screws, avoid pipes and electrical cables, etc, that may be present/

buried.

• The screw heads should not be flush to the wall.

• Certain types of wall may require plugs to be anchored in the wall before the screws are

inserted.

6

At the time of shipment, the batteries are not charged. 

• When the batteries are fully charged, the charge

indicator goes off and "

Fully charged" is displayed.

For more information, see "Battery Information" on

page 51.

• It is normal for the handset and charger to feel warm

while the batteries are charging.

• Keep devices sensitive to magnetic fields away from the

charger.

• Use only the included charger.

25 mm

for charger

1. Install the two screws in the wall, spacing them 25 mm apart.

20 mm or longer

Space

(2 mm)

•

 Recommended screw size is

  

M4 x 20.

25 mm

Screws
(Not supplied)

2. Mount the charger securely on the wall.

• Please copy this page and use as a reference for wall mounting.

Make sure to set the print size to correspond with the size of this page. If the dimension

of the paper output still deviates slightly from the measurement indicated here, use the

measurement indicated here.

• When mounting the charger, ensure that the correct screws are used for the type of wall.

• Make sure that the wall that the charger will be attached to is strong enough to support

the total weight of the handset and charger (approx. 190 g). If not, it is necessary for the

wall to be reinforced.

• When this product is no longer in use, make sure to detach it from the wall.

• When inserting screws, avoid pipes and electrical cables, etc, that may be present/

buried.

• The screw heads should not be flush to the wall.

• Certain types of wall may require plugs to be anchored in the wall before the screws are

inserted.

6

6

Baterije po isporuci nisu napunjene. 

•  Kad se baterije potpuno napune, isključit će se 

pokazatelj punjenja, a na zaslonu će se pojaviti 

“

Fully charged” (Baterija puna). Dodatne informacije 

potražite pod "Podaci o bateriji" na stranici 51.

•  Normalno je da slušalica i punjač zagriju dok se pune 

baterije.

•  Uređaje osjetljive na magnetska polja držite podalje od 

punjača.

•  Koristite isključivo isporučeni punjač.

•  Kopirajte ovu stranicu i upotrijebite je kao pomoć pri postavljanju na zid.  

Pripazite da veličina ispisa odgovara veličini ove stranice. Ako dimenzije ispisanog 

papira blago odstupaju od ovdje naznačenih mjera, koristite mjere koje su ovdje 

naznačene.

•   Kad postavljate punjač, provjerite koristite li ispravne vijke za dotičnu vrstu zida.

•  Provjerite je li zid na koji postavljate punjač dovoljno čvrst za podupiranje ukupne 

težine slušalice i punjača (približno 190 g). Ako nije, potrebno je pojačati zid.

•   Kada uređaj više nije u uporabi, obavezno ga odspojite iz zida.

•   Kad umećete vijke, izbjegavajte eventualno prisutne/zakopane cijevi, električne 

kabele itd.

•   Glave vijaka ne smiju biti uza zid.

•   Na određenim ćete vrstama zidova možda morati usidriti utikače prije umetanja 

vijaka.

Vijci 

(nisu isporučeni)

20 mm ili više
•  Preporučena veličina vijka je 

M4 x 20.

Udaljenost 

(2 mm)

za punjač

1.  Postavite dva vijka na zid s razmakom od 25 mm.

2.  Pričvrstite punjač na zid.