Panasonic S-ICX 매뉴얼
180
S-ICX (International) issued June 2000
S-ICX-45-700
Chapter 5. Key Telephone Features
Section 700 - Operation
To answer an OHVA:
To transfer a call using OHVA:
To reply to off-hook voice announcement with a text message:
3. Enter the OHVA feature access code (default = 8 [UK/HK]
or 8# [Taiwan, Malaysia, Indonesia]).
• OHVA EXT XXX displays if busy
extension called (where XXX = calling
extension.
extension.
• INT LED flashes
4. Make your announcement
Action
Result
1. Press the OHVA Split key.
Note: You must program an FF key as a split key (default =
*71) to use this feature.
*71) to use this feature.
Split key flashes red
2. To return to the previous call, press the Split key again.
The OHVA originating party receives
Busy signal.
Busy signal.
Action
Result
1. Press the HOLD key to put the current call on hold.
Current call on hold
2. Dial the extension number to which the call is being trans-
ferred.
Busy signal
3. Enter OHVA feature access code (default = 8 [UK/HK] or
8# [Taiwan, Malaysia, Indonesia]) and announce the call to
be transferred.
be transferred.
4. If transfer is:
• Not accepted, retrieve the call by pressing the associ-
ated flashing MCO key (if an appearing call) or by
pressing the HOLD key (if a non appearing call).
pressing the HOLD key (if a non appearing call).
• Accepted, and On-hook Transfer is enabled for your
extension, replace the handset or press the ON/OFF
key.
key.
If On-hook Transfer is not enabled for your extension,
press the PROG key (or RELEASE key if using DSS/
72).
press the PROG key (or RELEASE key if using DSS/
72).
Action
Result
1. Press the MSG FF key.
2. Enter the Reply Text Message number (1-9, 0). See Table
19 on page 179 for the text message replies.)
The text message reply appears on the
camped on telephone display.
camped on telephone display.
Action
Result