Panasonic DPMC210 작동 가이드

다운로드
페이지 128
2. Preparation
21
For assistance, please contact an authorized Panasonic dealer.
2.5.2 Using the automatic document feeder
1
Insert the document (up to 50 pages) FACE UP into 
the feeder until a single beep is heard.
2
Adjust the width of the document guides (
1) to fit 
the actual size of the document.
Note:
L
Confirm that there are no documents on the scanner 
glass.
L
Check that any ink, paste or correction fluid has dried 
completely.
L
Remove clips, staples or other fasteners.
L
Do not insert the following types of documents (Make 
a copy of the document using the scanner glass and 
set the copy instead.):
Chemically treated paper such as carbon or 
carbonless duplicating paper
Electrostatically charged paper
Badly curled, creased or torn paper
Paper with a coated surface
Paper with printing on the opposite side that can 
be seen through the other side, such as 
newsprint
L
The total height of the documents when laid flat, 
must be less than 5 mm (
3
/
16
"). If the documents 
exceed the capacity of the automatic document 
feeder, they may fall or cause a jam in the feeder.
L
To set a document with a width of less than 210 mm 
(8 
1
/
4
"), we recommend using the scanner glass to 
copy the original document onto A4 or letter-size 
paper, then setting the copied document.
L
Do not set documents that do not satisfy the 
requirements of size and weight. Make a copy of the 
document using the scanner glass and set the copy.
L
Available document size, document weight and 
effective scanning area are as follows:
Minimum document size
Maximum document size
Effective scanning area
L
Shaded area will be scanned.
Document weight
L
Single sheet:
45 g/m
2
 to 90 g/m
2
 (12 lb to 24 lb)
L
Multiple sheets:
60 g/m
2
 to 80 g/m
2
 (16 lb to 21 lb)
Using the document tray extender
When you insert the legal-size paper, open the 
document tray extender (
1).
1
148 mm
(6")
148 mm
(6")
600 mm
(23 
5
/
8
") 
216 mm
(8 
1
/
2
")
216 mm (8 
1
/
2
"
)
208 mm (8 
3
/
16
"
)
 4 mm (
5
/
32
"
)
 4 mm (
5
/
32
"
)
 4 mm (
5
/
32
"
)
 4 mm (
5
/
32
"
)
1