Panasonic ICX 매뉴얼

Section 700 - Operation

Chapter 3. System Features

ICX-35-700

ICX (International), issued March/1998

For example, an outgoing call is an LRS Outgoing call (L) but it is also a transferred call. The Call
Logging data condition code will be T to indicate that the call was an Outgoing Transfer. (A
transferred call’s condition code takes precedence over the type of call - LRS Outgoing call [

].)

Table 9.

Priority of incoming call condition codes

For example, an incoming call is a DDI Incoming call (D), but it is also a transferred call. The Call
Logging data condition code will be t to indicate that the call was an Incoming Transfer call. (A
transferred call’s condition code takes precedence over the type of call - DDI Incoming call [D].)

Figure 1. Output data formatt

Condition Code: (I: Incoming call / D: DDI incoming call / h: Hold incoming call / N: Network
incoming call / S:DISA incoming call / t: Transfer incoming call / A: Abandoned Call / O: Outgoing
call [Non LCR] / F: Call forward outside call / H: Hold outgoing call / L: LCR outgoing call / T:
Transfer outgoing call / W: Closed Numbering)

Call start time (MM=01 to 12 / DD=01 to 31 / HH=00 to 23 / MM=00 to 59 / SS=00 to 59)

3rd

W = Closed Numbering

Note: In the case of an MCO outgoing call seizing the
private line, the condition code 0 is displayed.

4th

L = LCR Outgoing Call

Lowest

O = Outgoing Call

Priority

Condition

Code

Description

Highest

h or t

h = Incoming Hold
t = Incoming Transfer

2nd

D, N, or S

D = DDI Incoming Call
N = Network Incoming Call
S = DISA Incoming Call

Lowest

I or A

I = Incoming Call
A = Abandoned Call

Priority

Condition

Code

Description

)RUPDW#&4

7#002''#++=00=66#++=00=66#1111#7777#GGGGGGGGGGGGGGGGGGGGGGGG#DDDDDDDDDD#YYYYY

)RUPDW#&5

7#002''#++=00=66#++=00=66#1111#7777#GGGGGGGGGGGGGGGGGGGGGGGG#DDDDDDDDDD#YYYY

GGGGGGGGGGGGGGGG#FFFFFFFF

PP=VV

;