Panasonic DP-2310 작동 가이드

16

NOTE

1. The shape of the telephone line cable and power cord may differ depending on the each 

country’ s regulation or specification.

Blinks when there is data traffic
on the LAN.

LINK Lamp
Illuminates when connected to the LAN. 
Lamp will not turn ON if LAN cable is defective 
(contains breaks).

LAN Cable
(10Base-T/100Base-TX Cable)
Insert the plug until a click is heard.  
(LAN cable is not included with the product.)
Purchase a Category 5 Cable, compliant with 
EIA/TIA 568-A-5 standard.

10Base-T/100Base-TX Ethernet Hub

Ethernet LAN 
(10Base-T/100Base-TX) 
Cable (Not  included)

Telephone Jack

Plug one end of the
telephone line cable into
the telephone
jack supplied by the
telephone company and
the other end into the LINE
jack on the left side of the
machine. (Refer to 
the Dialling Method.
 See page 126.)   

You can connect an
additional standard single
line telephone to the
machine. To connect the
telephone, remove the
protective tab on the TEL
jack.

After connecting all cables
and the Power Cord, turn the
Main Power Switch on the Back
and the Power Switch
on the Left Side of the machine
to the ON position.

Telephone Line 
Cable Adapter