Panasonic KX-TD816E 사용자 설명서

5

Allows you to assign a Flexible (CO, DSS) button as the Phantom button.

— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].

1. Press the desired Flexible (CO, DSS) button which you wish to

assign as the Phantom button.

2. Dial 88.

• The display shows:

3. Dial the phantom extension number.

• The display shows:

(— xxxx: phantom extension
number)

• To erase an incorrect entry, press the CLR (S2) button or the

TRANSFER (CLEAR) button.

(The TRANSFER button becomes the CLEAR button while in the programming

mode.)

4. Press the STORE button.

• The STORE indicator light turns on.

• The display shows the initial programming mode.

— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.

• The phantom extension number must be assigned in program [130] “Phantom Extension

Number Assignment” before assigning the Phantom button.

• A DSS button can be assigned as the Phantom button so that the operator can use it for

transferring a call.

• If you assigned the Phantom button to one of the CO buttons (13 through 24) on your KX-

T7230 telephone and change the telephone to a KX-T7235 model, you must re-program the
setting as the KX-T7235 telephone has only 12 CO buttons.  If you do not change the
setting, the phantom extension call reaches the INTERCOM button.

• System Programming — Installation Manual

[130] Phantom Extension Number Assignment

1

2

4

AUTO DIAL

STORE

3

Phantom extension number

EXT-

CLR

EXT-xxxx

CLR