Panasonic SCPTX7 작동 가이드

RQ

T

8

9

2

7

≥Are the left and right cords connecting the speakers or the external device 

reversed? Check the cord for the speakers and the external device and 
connect them correctly.

≥Are the left and right speakers properly installed?

Look on the bottom of the speakers to identify the left and right speakers.

≥Are there any AC mains leads or fluorescent lights near any connected 

cords? Keep this unit as far away as possible from other electrical devices.

≥Has the LAN cable come unplugged? Check that the LAN cable is 

properly connected.

≥Have you plugged in a modular cable for use with a telephone into the 

LAN terminal on this unit? Connect with a straight LAN cable.

≥Is the power for the modem or broadband router turned on? Turn the 

power on for each device.

≥Have you set the unit to use only the internal CD database? Set “CD 

database Setting” to “Yes” in “Network” menu. 

≥Is there a mistake in the network settings? Follow any instructions you 

may have received from your ISP (Internet Service Provider) and make 
changes to the settings accordingly.

≥Are the broadband router settings correct? Read the operating 

instructions for the broadband router.

≥Is the broadband router and/or modem correctly connected? Check the 

operating instructions for each device and connect accordingly.

≥Does your Internet Service Provider (ISP) or service contract prevent 

multiple terminals connecting at the same time? Check the content and 
regulations of your contract.

You have forgotten your 
ratings password.
Reset all the settings in 
“Setup for Video”  to 
Factory Preset.

≥Switch the selector to “DVD/CD”, and when the unit is stopped, 

simultaneously press [

∫] on the main unit and [S10] on the remote 

control until “Initialised” is displayed. All settings in “Setup for Video” will 
return to the default values.

≥Is the unit performing the recording? Perform operations after recording 

finishes.

≥Check the connection of the HDMI cable.

≥Is “VIERA Link” set to “On” in the  “HDMI” menu?

≥Check the VIERA Link settings on the connected device.

≥If the HDMI device connection was changed, there has been a power failure, 

or the plug was removed and then reinserted to the power outlet, VIERA Link 
may stop working. In any of these cases, perform the steps listed below.
1 Turn on the power to all devices connected with an HDMI cable, and 

then turn the TV (VIERA) off and on again.

2 Turn the VIERA Link settings on the TV(VIERA) to “Off” and then “On” 

again. (For more information, refer to the VIERA operating instructions.)

3 Switch the VIERA input to the HDMI connection with this unit, and after 

this unit’s screen is displayed, check the VIERA Link operations.

≥If it is difficult to find the playlist that a track was added to, search by the 

name of the track. All tracks in the Music Collection will be displayed by 
track name. 

≥Are you playing the track immediately after recording it? Adding the track 

to Music Shuffle takes place when the unit is in standby mode.

≥Does this abnormality only occur with specific tracks? Depending on the 

track, it may not be added to any genre.

1] (PLAY).

≥Does the inserted disc conform to disc standards and specifications? 

Replace it with a disc that conforms to disc standards.

≥Condensation has formed: Wait 1 to 2 hours for it to evaporate.

PTX7EB.book  Page 102  Monday, March 12, 2007  10:13 AM