Panasonic SCPTX7 작동 가이드

다운로드
페이지 112
RQ
T
8
9
2
7
108
Glossary
AAC (Advanced Audio Coding)
An audio compression method that compresses audio 
to approximately 1/12 of its size with CD-level quality. 
CPPM (Content Protection for Pre-recorded Media)
A copy protection system used for DVD-Audio files. This 
unit supports CPPM.
Decoder
A decoder restores the coded audio signals on DVDs to 
normal. This is called decoding.
DHCP (Dynamic Host Configuration Protocol)
Provides a mechanism for automatically assigning 
network information such as the IP address or Subnet 
mask sent by the router and so on to this unit.
DivX
DivX is a popular media technology created by DivX, 
Inc. DivX media files contain highly compressed video 
with high visual quality that maintains a relatively small 
file size.
DNS Server
A server which acts like a telephone directory and 
translates Internet domain names into IP addresses.
Dolby Digital
This is a method of coding digital signals developed by 
Dolby Laboratories. Apart from stereo (2-channel) 
audio, these signals can also be multi-channel audio. A 
large amount of audio information can be recorded on 
one disc using this method.
Down-mixing
This is a process of remixing the multi-channel audio 
(surround sound) on some discs into two channels. 
When you want to listen to the audio on a DVD with a 
5.1 channel digital surround track through your 
television speakers, the down-mixed audio will be 
output.
Some DVD-Audio prevent down-mixing of all or part of 
their contents. When playing such discs, or such parts 
of the disc, unless the number of connected speakers is 
the same as the disc’s channel specification, audio will 
not be output properly.
DTS (Digital Theater Systems)
This surround system is used in many movie theaters 
around the world. There is good separation between the 
channels, so realistic sound effects are possible.
Dynamic range
Dynamic range is the difference between the lowest 
level of sound that can be heard above the noise of the 
equipment and the highest level of sound before 
distortion occurs.
Film and video
DVD-Videos are recorded using either film or video. 
This unit can determine which type has been used, then 
uses the most suitable method of progressive output.
Film:
Recorded at 25 frames per second (PAL discs) 
or 24 frames per second (NTSC discs). (NTSC 
discs recorded at 30 frames per second as well.) 
Generally appropriate for motion picture films. 
Video: Recorded at 25 frames/50 fields per second 
(PAL discs) or 30 frames/60 fields per second 
(NTSC discs). Generally appropriate for TV 
drama programmes or animation. 
Frame still and field still
Frames are the still pictures that go together to make a 
moving picture. There are about 30 frames shown each 
second.
One frame is made up of two fields. A regular television 
shows these fields one after the other to create frames.
A still is shown when you pause a moving picture. A 
frame still is made up of two alternating fields, so the 
picture may appear blurred, but overall quality is high.
A field still is not blurred, but it has only half the 
information of a frame still so picture quality is lower.
Gateway
IP address of the electronic device providing Internet 
access. Usually called a router IP address. (e.g., 
192.168.0.1)
HDD (Hard disk drive)
This is a mass data storage device used in PC, etc. A 
disk with a surface that has been treated with magnetic 
fluid is spun and a magnetic head is brought in close 
proximity to facilitate the reading and writing of large 
amounts of data at high speed.
HDMI (High-Definition Multimedia Interface)
HDMI is a next-generation digital interface for consumer 
electronic products. Unlike conventional connections, it 
transmits uncompressed digital video and audio signals 
on a single cable. This unit supports high-definition 
video output (720p,1080i,1080p) from the HDMI AV 
OUT terminal. To enjoy high-definition video, a high-
definition compatible television is required.
Hub
Used for connecting more than one device to the 
network.
IP address
A set of numbers which distinguish each PC on the 
network when, for example, connected to the Internet. 
When using a PC in a LAN (
➜ page 109) to access a 
PC or device that is not included in the LAN, the IP 
address is called the local IP address. (e.g., 
192.168.0.10)
PTX7EB.book  Page 108  Monday, March 12, 2007  10:13 AM