Panasonic SCPTX7 작동 가이드

RQ

T

8

9

2

7

You can use only the scheduled timer recording that you 
want to use by switching only the desired scheduled 
timer recording to “On”

 

from the list of scheduled timer 

recording settings.

After completing step 4 on the left column on page 78,

3 4 2 1] to select the scheduled timer 

Selected scheduled timer recording day of the 
week and starting time.

3 4] to select “Timer Setup” and 

3 4] to select “On” and press 

[ENTER].
When you do not want to use the scheduled 
settings, select

 

“Off”.

On : Use this scheduled timer recording
Off :  Do not use this scheduled timer recording 

(setting only)

Invalid (Overlap): This scheduled timer 

recording conflicts or overlaps 
with another scheduled timer 
recording and cannot be used.

s (Erase setting):Scheduled timer recording not 

yet set.

The unit returns to the screen shown in step 5.
Repeat steps 5 to 7 and switch each scheduled 
timer recording to “On” (or “Off”).

The unit returns to the previous screen.

Í] to turn off the power.

If the power is not turned off, the timer will not 
operate.

To return to the previous screen
Press [RETURN].
To change settings of a scheduled timer recording
Select the number of the scheduled timer recording in 
step 5 and set again.

≥Only radio and externally connected devices can 

be recorded with the scheduled timer recording 
function

. 

You cannot record from a CD or 

“OPTION” either with this function.

≥To avoid cutting off the beginning of the track that 

is recording, the recording will begin a few 
seconds before the set day of the week and time. 
(While recording, “

FREC” and the number of the 

scheduled timer recording will flash on the 
television.)

≥All scheduled timer recordings will operate on the 

specified day of the week and time, except for 
scheduled timer recordings indicated as “Off”.

≥If the starting time for the scheduled timer 

recording occurs at the same time as another 
scheduled timer recording

 

finishes, the second 

recording may start late. 

When a scheduled timer recording overlaps 
with another scheduled timer recording
You cannot record when a scheduled timer 
recording overlaps with another scheduled timer 
recording. When a timer is activated by selecting 
“On”, other timers that overlap with this scheduled 
recording will then be set to “Invalid (Overlap)” and 
cannot be used. If you want to activate a scheduled 
timer recording that is currently set to “Invalid 
(Overlap)”, follow the steps in the left column to 
switch the scheduled timer recording to “On”. 

To delete unnecessary scheduled timer 
recording settings
After step 4 on the previous page
1 Press  [

3 4 2 1] to select unnecessary 

scheduled timer recording settings and press 
[ENTER].

2 Press  [

3 4] to select “Timer Setup” and press 

[ENTER].

3 Press  [

3 4] to select “s (Erase setting)” and 

press [ENTER].

To play after setting a timer
Even after setting a scheduled timer recording you 
can play the unit as usual. However, after you finish 
playing, be sure to set the unit to standby mode. 
Scheduled timer recording will not record if the unit 
is turned on.
≥Changing the volume and audio source will have 

no effect on the details of the settings.

If a power failure, etc. caused timers to lose 
their setting
The clock is reset, and you cannot enter the timer 
recording screen.
Set the clock again (

➜ page 17).

NOTE

TIPS

PTX7EB.book  Page 79  Monday, March 12, 2007  10:13 AM