Panasonic ICX 매뉴얼
2. Setting Up Your Phone
ICX-
45
-750
ICX (International), issued June 2000
29
Notes:
• Before linking multiple SSD numbers to a PSD bin, the SSD bins must
already have been programmed with the appropriate speed dial information.
(This requires system programming.)
(This requires system programming.)
• If numbers do not appear on the display (00-79 or 000-799) when you use
SSD codes, your extension is not programmed to display that data.
1. Pick up the handset or press the ON/OFF key.
2. Either:
• Press the PROG key and then press the MEMORY key.
OR
• Enter the Speed Dial Set/Clear code (default = 710 (HK/UK) or 710#).
3. Press the soft or one-touch key (for the PSD bin [80-99]) to be programmed.
4. Press the MEMORY key.
5. Enter the SSD bin number that contains the first part of the number to be dialled.
(If a pause is required, press the REDIAL key.)
6. Repeat steps 4-5 (up to 5 more times) for each remaining SSD number to be
linked.
7. Press the HOLD key when you are finished.
8. Replace the handset or press the ON/OFF key.
1. If necessary, select the trunk group (9 [UK/HK], 0 [Tawain, Malaysia, Indonisia],
or 81-84) to access an outside line. (Normally the trunk is selected by the speed
dial numbers.)
dial numbers.)
2. Press the PSD key.
Assigning and Deleting Names for PSD Numbers
After assigning a PSD number to a one-touch or soft key, you can assign a name to
the key (e.g., “Home,” “John,” etc.). You can then view the assigned PSD name
when you are in the PSD Directory mode.
the key (e.g., “Home,” “John,” etc.). You can then view the assigned PSD name
when you are in the PSD Directory mode.
To link speed dial numbers to a PSD bin
To use a PSD key that links multiple speed dial numbers