Moxa ABC-01 Backup Tool 사양 가이드
1
Industrial Ethernet Solutions
© Moxa Inc. All Rights Reserved. Updated Jun. 17, 2009. Specifications subject to change without notice. Please visit our website for the most up-to-date product information.
ABC-01
Reduce system downtime, without an additional power input
›
Plug-n-Play system backup and restoration
›
Front label for writing identification information
›
Compact, rugged, reliable design
›
Supports Moxa’s managed Ethernet switches
›
Configuration backup and restoration tool for managed switches
RS-232 RJ45 console port connection
•
Store the complete configuration of one switch
•
Load the system configuration automatically after system reboot
•
Manually load and save the system configuration through the web console
•
Features
Introduction
Specifications
Ordering Information
The ABC-01 configuration backup and restoration tool can be used to
save and load the configuration of Moxa’s managed Ethernet switches
through the switches’ RS-232 console port. This simple yet powerful
tool makes it much easier to back up a switch’s system parameters, or
save and load the configuration of Moxa’s managed Ethernet switches
through the switches’ RS-232 console port. This simple yet powerful
tool makes it much easier to back up a switch’s system parameters, or
even replace an existing switch with a new switch. With the ABC-01,
you can quickly re-install a substitute switch (of the same model) or
recover the entire system configuration, including IP address, if a
switch failure occurs.
you can quickly re-install a substitute switch (of the same model) or
recover the entire system configuration, including IP address, if a
switch failure occurs.
Portable low-power design requires no power supply
•
CE and FCC approval
•
Basic Operation
Connector: RS-232 RJ45 port
Configuration: Use the web console of Moxa’s managed switches
Configuration: Use the web console of Moxa’s managed switches
Power Requirements
Input Voltage: 3 to 5 VDC (through the RS-232 port’s RTS signal)
Physical Characteristics
Housing: PVC molding, IP40 protection
Weight: 50 g
Dimensions: 32.5 x 97 x 12 mm (8.07 x 3.82 x 0.47 in)
On-switch Installation: M4 screw (< 4 mm)
Cable Length: 35 cm (including connector)
Weight: 50 g
Dimensions: 32.5 x 97 x 12 mm (8.07 x 3.82 x 0.47 in)
On-switch Installation: M4 screw (< 4 mm)
Cable Length: 35 cm (including connector)
Environmental Limits
Operating Temperature: 0 to 60°C (32 to 140°F)
Storage Temperature: -20 to 70°C (-4 to 158°F)
Ambient Relative Humidity: 5 to 95 % (non-condensing)
Ambient Relative Humidity: 5 to 95 % (non-condensing)
Regulatory Approvals
EMI: FCC Part 15, CISPR (EN55022) Class A
EMS:
EN61000-4-2 (ESD), level 2
EN61000-4-3 (RS), level 3
EN61000-4-4 (EFT), level 3
EN61000-4-5 (Surge), level 3
EN61000-4-6 (CS), level 3
EMS:
EN61000-4-2 (ESD), level 2
EN61000-4-3 (RS), level 3
EN61000-4-4 (EFT), level 3
EN61000-4-5 (Surge), level 3
EN61000-4-6 (CS), level 3
Warranty
Warranty Period: 5 years
Details: See www.moxa.com/warranty
Details: See www.moxa.com/warranty
Available Models
ABC-01: Configuration backup and restoration tool for managed Ethernet switches, 0 to 60°C operating temperature