Weed Instrument 2M11 Input Module 사양 가이드
Safety and Warning Information
Connect the DIN Rail, via the Model 2A09 End
Clamp, to protective earth ground with low
impedance. The modules are grounded to PE
when they are snapped onto the DIN Rail. A
Model 2A09 End Clamp on each side of the
module bundle on the DIN rail prevents
accidental disconnection of the modules’
interconnection bus.
Clamp, to protective earth ground with low
impedance. The modules are grounded to PE
when they are snapped onto the DIN Rail. A
Model 2A09 End Clamp on each side of the
module bundle on the DIN rail prevents
accidental disconnection of the modules’
interconnection bus.
Weed Instrument Co., Inc.
Fiber Optics Division
Phone: 800-880-9333
512-434-2850
512-434-2850
Fax: 512-434-2851
Email:
fiberop@weedinstrument.com
Visit: www.weedinstrument.com
Important Notice - Before utilizing the product, the user should
determine the suitability of the product for its intended use. The
user assumes all risk and liability in connection with such use.
WEED INSTRUMENT'S WRITTEN WARRANTY FOR THE
PRODUCT IS MADE IN LIEU OF ALL OTHER WARRANTIES,
EXPRESSED OR IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. The user's exclusive remedy for breach of Weed
Instrument's written warranty shall be the repair or replacement
of such quantity of product which is proven to be defective. In no
case shall Weed Instrument be liable for any special, incidental,
or consequential damages based upon breach of contract,
negligence, strict liability or other legal theory.
determine the suitability of the product for its intended use. The
user assumes all risk and liability in connection with such use.
WEED INSTRUMENT'S WRITTEN WARRANTY FOR THE
PRODUCT IS MADE IN LIEU OF ALL OTHER WARRANTIES,
EXPRESSED OR IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. The user's exclusive remedy for breach of Weed
Instrument's written warranty shall be the repair or replacement
of such quantity of product which is proven to be defective. In no
case shall Weed Instrument be liable for any special, incidental,
or consequential damages based upon breach of contract,
negligence, strict liability or other legal theory.
Publication Number:
RM0900171 Rev. 8/04
Weed Instrument
Fiber Optics
EOTec 2000 MUX Model
2M11
Dual Channel, 0-10VDC Input
Installation Instructions
2 Channel, 0-10VDC, Analog
Input Module
For use with the EOTec 2000
Multiplexer (MUX)
Power Requirements
9VDC @ 200mA via
the interconnection Bus
from a 2A06 or 2A16
power supply or the
MUX Base Module
(2M55, 2M57, 2M59 or
2M61)
the interconnection Bus
from a 2A06 or 2A16
power supply or the
MUX Base Module
(2M55, 2M57, 2M59 or
2M61)
Connections
Pluggable, Cage Clamp
Screw Terminal Blocks,
Accept 12 to 24 AWG
Screw Terminal Blocks,
Accept 12 to 24 AWG
Input Range
0 to 10VDC
Update Rate
57.6KHz, independent
of number of
modules/channels
utilized
of number of
modules/channels
utilized
Input Impedance
7G Ohms
Signal Resolution
16 bit
Reference Accuracy
0.01% @ 25°C
Ambient Temp. Effect 0.08% / 50°C change
Ambient Conditions
-40 to 85°C
0
to
95%
Humidity
(Non-condensing)
Mounting
35mm DIN Rail
Weight
<
9oz
Flammability Rating
UL V-0
Specifications