Moxa LDP1602 LCD Display Module 사양 가이드
1
w w w. m o x a . c o m
i n f o @ m o x a . c o m
Serial-to-Ethernet Solutions
Snap-on module for the ioLogik 2000 and ioMirror 3000 series
1. Remove the ioLogik’s top cover.
2. Plug in the LCD module.
3. Check and configure the IP address.
4. Check IP and I/O status.
Hot-pluggable display module for ioLogik Active Ethernet I/O,
›
serial I/O, and Peer-to-Peer I/O
Easy, portable configuration kit for IP display and configuration
Easy, portable configuration kit for IP display and configuration
›
Direct display for analog value and digital input, counter status
›
No battery required (powered through the I/O )
›
LDP1602 LCD Module
Installing the LCD Module
Specifications
Ordering Information
LCD Screen: 16 x 2 text display (in English)
Operating Temperature: 0 to 55°C (32 to 131°F)
Operating Temperature: 0 to 55°C (32 to 131°F)
Storage Temperature: -20 to 70°C (-4 to 158°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Ambient Relative Humidity: 5 to 95% (non-condensing)
LDP1602: LCD module with 16 x 2 text display and 5 buttons
The certification logos shown here apply to some or all of the products in this
section. For details, see “Regulatory Approvals” under “Specifications” below.