Cisco CATALYST 4500 7 SLOT CHASSIS FAN NO POWER SUPPLY REDUNDANT SUPCAPABLE 사양 가이드
Product End-of-Life Notice
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 1 of 4
End-of-Sale and End-of-Life Announcement for the Cisco Catalyst
4500 Non-E-Series Chassis
4500 Non-E-Series Chassis
EOL6869
Cisco announces the end-of-sale and end-of life dates for the Cisco Catalyst 4500 Non-E-Series Chassis.
The last day to order the affected product(s) is July 31, 2010. Customers with active service contracts will
continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the
EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s).
Table 2 lists the product part numbers affected by this announcement. For customers with active and paid
service and support contracts, support will be available until the termination date of the contract, even if this
date exceeds the Last Date of Support shown in Table 1.
Table 1.
End-of-Life Milestones and Dates for the Cisco Catalyst 4500 Non-E-Series Chassis
Milestone
Definition
Date
End-of-Life
Announcement Date
Announcement Date
The date the document that announces the end of sale and end of life of a product is distributed to
the general public.
the general public.
January 30, 2010
End-of-Sale Date
The last date to order the product through Cisco point-of-sale mechanisms. The product is no
longer for sale after this date.
longer for sale after this date.
July 31, 2010
Last Ship Date: HW
The last-possible ship date that can be requested of Cisco and/or its contract manufacturers.
Actual ship date is dependent on lead time.
Actual ship date is dependent on lead time.
October 29, 2010
End of SW Maintenance
Releases Date: HW
Releases Date: HW
The last date that Cisco Engineering may release any final regular software maintenance releases
or software fixes through rebuilds of Release 12.2.(50)SG or 12.2(53)SG. After this date, software
maintenance releases or software fixes will be made available on subsequent software releases.
or software fixes through rebuilds of Release 12.2.(50)SG or 12.2(53)SG. After this date, software
maintenance releases or software fixes will be made available on subsequent software releases.
July 31, 2011
End of software
maintenance releases
through migration
maintenance releases
through migration
The last date that Cisco Engineering may release any final software maintenance releases or
software fixes for critical network impacting issues that have been identified by the customer to
Cisco TAC and subsequently qualified via Cisco's normal evaluation process. This support will be
provided according to the following terms and conditions:
software fixes for critical network impacting issues that have been identified by the customer to
Cisco TAC and subsequently qualified via Cisco's normal evaluation process. This support will be
provided according to the following terms and conditions:
●
Cisco TAC will first use commercially reasonable efforts to work with the Customer to
determine the locality of impact and to find a workaround for the problem.
●
If an alternative workaround is not possible during the extended period of support, then Cisco
will make commercially reasonable efforts to provide a bug fix solution to remedy the problem.
●
If despite commercially reasonable efforts Cisco is unable to provide a software based solution,
it may be necessary for the Customer to remove or upgrade the impacted software based
systems to correct the problem.
systems to correct the problem.
After this date Cisco Engineering will no longer repair or maintain Releases for products listed in
this announcement.
this announcement.
July 31, 2013
End of Security and
Vulnerability Fixes
Vulnerability Fixes
The last date that Cisco will provide support for security vulnerabilities, defined as network-
impacting security vulnerabilities that have been identified by the Customer to Cisco TAC and
subsequently qualified via Cisco's normal evaluation process. Critical security and vulnerability
fixes will be provided according to the following terms and conditions:
impacting security vulnerabilities that have been identified by the Customer to Cisco TAC and
subsequently qualified via Cisco's normal evaluation process. Critical security and vulnerability
fixes will be provided according to the following terms and conditions:
●
Cisco TAC will first use commercially reasonable efforts to work with the Customer to
determine the locality of impact and to find a workaround for the problem.
●
If an alternative workaround is not possible during the extended period of support, then Cisco
will make commercially reasonable efforts to provide a bug fix solution to remedy the problem.
●
If despite commercially reasonable efforts Cisco is unable to provide a software based solution,
it may be necessary for the Customer to remove or upgrade the impacted software based
systems to correct the problem.
systems to correct the problem.
July 31, 2013
End of Routine Failure
Analysis Date: HW
Analysis Date: HW
The last-possible date a routine failure analysis may be performed to determine the cause of
hardware product failure or defect.
hardware product failure or defect.
July 31, 2011
End of New Service
Attachment Date: HW
Attachment Date: HW
For equipment and software that is not covered by a service-and-support contract, this is the last
date to order a new service-and-support contract or add the equipment and/or software to an
existing service-and-support contract.
date to order a new service-and-support contract or add the equipment and/or software to an
existing service-and-support contract.
July 31, 2011