Canon EOS 5D Mark III Standard Zoom Lens Kit 사용자 매뉴얼

345

Using Eye-Fi Cards

 

Check that an access point is 
displayed for [Access point SSID:].

 

You can also check the Eye-Fi card’s 
MAC address and firmware version.

 

Press the <M> button to exit the 
menu.

X

The picture is transferred and the 
<H> icon switches from gray (Not 
connected) to one of the icons below.

 

For transferred images, O is 
displayed in the shooting information 
display (p.246).

H

 (Gray) Not connected : No connection with access point.

H

 (Blinking) Connecting : Connection with access point.

H

 (Displayed) Connected : Connection to access point established.

H

 (  ) Transferring

: Image transfer to access point in 

progress.

Transmission status icon

 

If “

” is displayed, an error occurred while retrieving the card 

information. Turn the camera’s power switch off and on again.

 

Even if [Eye-Fi trans.] is set to [Disable], it may still transmit a signal. In 
hospitals, airports, and other places where wireless transmissions are 
prohibited, remove the Eye-Fi card from the camera.

 

If the image transfer does not function, check the Eye-Fi card and 
personal computer settings. For details, refer to the card’s instruction 
manual.

 

Depending on the wireless LAN’s connection conditions, the image 
transfer may take longer or it may be interrupted.

 

Because of the transmission function, the Eye-Fi card may become hot.

 

The battery power will be consumed faster.

 

During the image transfer, auto power off will not take effect.