Canon EOS 5D Mark IV L-series Zoom Lens Kit 사용자 매뉴얼
313
3
Menu Function Settings
Metering timerN
You can change how long the exposure setting is displayed (AE lock
time).
You can change how long the exposure setting is displayed (AE lock
time).
With [Mode 2] set, continuous shooting will not work even if you set the
drive mode to <o> or <i>.
drive mode to <o> or <i>.
If you use flash with the flash mode set to E-TTL II/E-TTL autoflash,
shutter release will be performed by the same internal operation
mechanism as with viewfinder shooting. Therefore, shooting while
suppressing the mechanical sound will not be possible (regardless of the
[Silent LV shoot.] setting).
shutter release will be performed by the same internal operation
mechanism as with viewfinder shooting. Therefore, shooting while
suppressing the mechanical sound will not be possible (regardless of the
[Silent LV shoot.] setting).
When using a non-Canon flash unit, set it to [Disable]. The flash will not
be fired if it is set to [Mode 1] or [Mode 2].
be fired if it is set to [Mode 1] or [Mode 2].
If [Mode 2] is set and you use a remote controller (p.279), the operation
will be the same as with [Mode 1].
will be the same as with [Mode 1].
With the TS-E17mm f/4L or TS-E24mm f/3.5L II lens, you can use [Mode 1]
or [Mode 2].
or [Mode 2].
Selecting any of the items below will cancel Live View shooting. To start Live
View shooting again, press the <0> button.
• [z3: Dust Delete Data], [53: Sensor cleaning], [55: Clear all camera
View shooting again, press the <0> button.
• [z3: Dust Delete Data], [53: Sensor cleaning], [55: Clear all camera
settings], or [55: zfirmware ver.].